Ok. This is in line with our direction. We are moving to Open Source tool set so all this can be put in your hands. The aPXO tool set will be the first to go this route.
Nimesh -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden Sent: Saturday, October 11, 2003 8:52 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Management tools (Was: aBT w/N connector - Pocket PC simpleMonitor) Nimesh D. Parikh wrote: > We are experimenting with open source tool NetSNMP. It looks quite > promising. So just hang in there and we may be able to give you guys a > good solution. Nish, some of us will be perfectly happy with a complete MIB that has sufficient documentation and actually validates. To give a couple of examples - the documentation on how to pull client rssi/lq information from the AP is nonexistent in the latest MIB - it has to be reverse engineered from network traces. The same with the dial-a-power (CR31?) settings. -- LarsG ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
