I see, but if the NOC looses communication with the remote sites... The what? (i.e. aren't you still reliant upon the RF network to get the signal to the re-boot device?) Thats why I like the Nighthawk stuff.. 900 MHz pages normnally get through...
Scott -----Original Message----- From: "The Wirefree Network" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Tue, 28 Oct 2003 10:07:02 -0800 Subject: RE: [smartBridges] Remote Power Reset Hardware > My solution uses software on my server to do the ping check and then > send > the reboot command out the serial port. > > I worked with this company to provide a reboot solution for POE units > as > well. > > Sully > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of shoffman > Sent: Tuesday, October 28, 2003 9:55 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Remote Power Reset Hardware > > Hmmm... > > I like that idea! May need a mix of both. (Our cisco boxes can get > flaky, in that they continue to operate, and respond to traffic (i.e. > pings etc..) but sometimes lock us out of Telnet/SSH/Web based > management. (Funky huh). Guess its like using what's left of its > brain > for important systems first (i.e. like keeping customer working). But > leaves us no choice but to hard cycle.. and I like the pager ability to > do that without going to the field.... > > Scott > > > -----Original Message----- > From: "The Wirefree Network" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Date: Tue, 28 Oct 2003 09:09:39 -0800 > Subject: RE: [smartBridges] Remote Power Reset Hardware > > > This is what I use: http://www.cpscom.com/reboot.htm > > > > Much cheaper solution. I have it setup to AUTO reboot any unit that > > does > > not respond to a ping and heartbeat on my server (in case it hangs). > > > > Sully > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > On Behalf Of shoffman > > Sent: Tuesday, October 28, 2003 5:46 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] Remote Power Reset Hardware > > > > Actually I have one better. A company called Nighthawk systems. Due > > the > > same thing, but off a pager signal. (i.e. I can page the unit). And > > at > > $9/month for paging, thats cheaper then a phone line, and the unit is > > like $700 each (depending on the number of outlets you have). > Getting > > ours installed in November.. will keep you posted. > > > > Scott > > > > > > -----Original Message----- > > From: "Blazen Wireless" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Date: Mon, 27 Oct 2003 14:55:13 -0800 > > Subject: Re: [smartBridges] Remote Power Reset Hardware > > > > > MessageThese run $749 each the difference between the 3401 and 3402 > > one > > > is for international and USA and the other is just plain US market > I > > > guess it has to do with the outlet setup. They also said the power > > cord > > > is separate 010-9334 price on that $14 Each for a 110 AC plug but > > from > > > the pics looks like a standard PC or monitor style plug so if it is > I > > > am sure someone has extra ones laying around. This price does come > > with > > > the Ethernet and the serial connections built in. Not to bad of a > > price > > > still kind of steep.... > > > > > > FYI I called and got this info just a few min ago.. > > > > > > ----- Original Message ----- > > > From: Jason > > > To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] > > > Sent: Monday, October 27, 2003 2:40 PM > > > Subject: [smartBridges] Remote Power Reset Hardware > > > > > > > > > I just saw this browser controlled 8 outlet AC power controller > on > > > the back cover of Remote Site & Equipment Management magazine. > > > > > > I don't know anything about it, but thought ya'll might be > > > interested: > > > > > > http://www.pulizzi.com/ipc > > > > > > Jason > > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
