Order an antenna with electrical downtilt. JH ----- Original Message ----- From: "Wayland Sothcott" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 18, 2003 3:20 AM Subject: Re: [smartBridges] Short distance coverage
> I am just after the general principle. I can't draw maps. > > Three buildings in a row. Middle one is largest, 3 floor, one is two floor > and other is ground floor. The ground floor building is 10 metres away, the > 2 floor is 30 metres away from the antenna. If I put a 12db omni at the roof > of the 3 floor middle one will I get good coverage at ground level? > > Wayland. > > ----- Original Message ----- > From: "Andrew Watkins" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, November 18, 2003 10:56 AM > Subject: RE: [smartBridges] Short distance coverage > > > > Without a map or site layout its hard to specify what goes where - e.g. is > > the AP in the middle or on the perimeter? Can you elaborate with a > drawing > > of the site(s)? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > > On Behalf Of Wayland Sothcott > > Sent: Tuesday, November 18, 2003 8:59 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] Short distance coverage > > > > Hello, > > > > I have a job where we are connecting four buildings which are within 40 > > metres of each other. We need good strong coverage in that area and don't > > want to have to use external antennas except on the airPoint. What would > be > > a suitable location and antenna type to achive this? I imagine a 12db omni > > mounted above the roof of the middle building would actually spread the > > signal too high up out of reach of the ground. Yet an antenna mounted > inside > > the building would have too much brick to go through. > > > > What are your experiences? > > > > Thanks, > > Wayland. > > > > > > The PART-15.ORG smartBridges Discussion List To Join: > > mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > > <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
