> Hi Manfred, > > Am 14.07.2010 23:23, schrieb Manfred Schwarb: > > Am 13.07.2010 12:05, schrieb Frieder Ferlemann: > >> I don't believe the OCZ-AGILITY2 is supported with the r3123 change:) > > For me it works, why do you believe this is not correct? > > because the smart attributes the drive has available > 1, 5, 9, 12, 171, 172, ... (OCZ-AGILITY2) > 1, 9, 12, 184, 195, ... (drive_db.h) > do not match. And the Agility 2 is based on a Sandforce controller > whereas the Agility is Indilinx based. >
OK. I assumed them to be similar. Both the chip and the firmware play an important role, of course. So we may need to change these settings as soon as we have some information about them. The point is, in the original patch from Marcin we had "OCZ[ -]AGILITY.*", and Christian set this to "OCZ[ -]AGILITY" ... > > So if you have some information about these attributes, please share! > > Sorry I only have the name for a single attribute > "Added S.M.A.R.T. attribute 177 (Wear Range Delta)" from: > http://www.ocztechnology.com/files/ssd_tools/OCZ%20SSD%20v1.10%20Firmware%20Release%20Notes.pdf > > There is an earlier post of smartctl -a here (and an unsuccessfull > attempt from me to convince OCZ into releasing attribute information) > http://www.ocztechnologyforum.com/forum/showthread.php?73547-strange-S.M.A.R.T.-values-and-TRIM-discard-option-with-linux-kernel-2.6.34 > Thanks for the pointers! Manfred > Greetings and thanks, > Frieder -- GMX DSL: Internet-, Telefon- und Handy-Flat ab 19,99 EUR/mtl. Bis zu 150 EUR Startguthaben inklusive! http://portal.gmx.net/de/go/dsl ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
