Hi,
Christian Franke wrote:
> In the OCZ forum "GrayWolf" thankfully did so
>
http://www.ocztechnologyforum.com/forum/showthread.php?76514-Vertex-2-SMART-says-drive-is-failing&p=544788&viewfull=1#post544788
> and got:
>
> --8<--------------------------------------------
> smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
> Copyright (C) 2002-10 by Bruce Allen,
http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family: SSD with Sandforce Controller
> Device Model: OCZ-VERTEX2
> Serial Number: OCZ-F22GJ63G1RKRDG00
> Firmware Version: 1.11
> User Capacity: 50,020,540,416 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 6
> Local Time is: Sun Aug 15 18:53:09 2010 CEST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> SMART Disabled. Use option -s with argument 'on' to enable it.
> -->8--------------------------------------------
>
> With "SMART support is: Enabled" and "SMART Disabled" looking
inconsistent.
>
>
>
>This is problem is unrelated to the drive database entry.
>
>Looks like SMART STATUS command fails. This is typically a driver >issue,
>add '-r ioctl,2' for debug output.
In attachment there is result of smartctl with -r ioctl,2
Hope this help.
-- Wolf
smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds resid=0
Incoming data, len=36:
00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20
10 4f 43 5a 2d 56 45 52 54 45 58 32 20 20 20 20 20
20 31 2e 31 31
status=0x0
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=36 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33
20 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31
30 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45
40 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00
a0 fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61
b0 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00
d0 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40
f0 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE
Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=52 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33
20 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31
30 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45
40 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00
a0 fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61
b0 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00
d0 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40
f0 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
016-031: 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33
032-047: 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31
048-063: 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45
064-079: 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
112-127: 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00
144-159: 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00
160-175: fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61
176-191: 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00
208-223: 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40
240-255: 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 01 00 00 00 00 00 00 00 00 00 10 10 ff ff
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 de
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
=== START OF INFORMATION SECTION ===
Model Family: SSD with Sandforce Controller
Device Model: OCZ-VERTEX2
Serial Number: OCZ-F22GJ63G1RKRDG00
Firmware Version: 1.11
User Capacity: 50,020,540,416 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Mon Aug 16 10:46:56 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
REPORT-IOCTL: Device=/dev/sda Command=SMART ENABLE
Input: FR=0xd8, SC=...., LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 0c 00 d8 00 00 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=16 milliseconds resid=0
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART ENABLE returned 0
SMART Enabled.
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 0c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=208 milliseconds resid=0
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS returned 0
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS CHECK
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=224 milliseconds resid=0
>>> Sense buffer, len=22:
00 72 00 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
10 00 4f 00 c2 00 50
status=2: [desc] sense_key=0 asc=0 ascq=0
Values from ATA Return Descriptor are:
00 09 0c 00 00 00 00 00 00 00 4f 00 c2 00 50
Output: ERR=0x00, SC=0x00, LL=0x00, LM=0x4f, LH=0xc2, DEV=0x00, STS=0x50
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES
Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=40 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 0f 00 69 64 ed 7b b4 00 00 00 00 05 33
10 00 62 62 80 01 00 00 00 00 00 09 32 00 64 64 1e
20 00 00 00 74 4d 2f 0c 32 00 64 64 0d 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 30 00 00 00 07
50 00 00 00 00 00 00 b1 00 00 00 00 00 00 00 00 00
60 00 00 b5 00 00 00 00 00 00 00 00 00 00 00 b6 00
70 00 00 00 00 00 00 00 00 00 00 bb 32 00 64 64 00
80 00 00 00 00 00 00 c2 22 00 00 00 00 00 00 00 00
90 00 00 c3 1c 00 69 64 ed 7b b4 00 00 00 00 c4 33
a0 00 64 64 00 00 00 00 00 00 00 e7 13 00 62 62 01
b0 00 00 00 00 00 00 e9 00 00 00 00 00 00 00 00 00
c0 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 f1 32
d0 00 00 00 00 00 00 00 00 00 00 f2 32 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 0a 00 01 0f 00 69 64 ed 7b b4 00 00 00 00 05 33
016-031: 00 62 62 80 01 00 00 00 00 00 09 32 00 64 64 1e
032-047: 00 00 00 74 4d 2f 0c 32 00 64 64 0d 00 00 00 00
048-063: 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
064-079: 00 00 00 00 00 00 00 00 00 00 ae 30 00 00 00 07
080-095: 00 00 00 00 00 00 b1 00 00 00 00 00 00 00 00 00
096-111: 00 00 b5 00 00 00 00 00 00 00 00 00 00 00 b6 00
112-127: 00 00 00 00 00 00 00 00 00 00 bb 32 00 64 64 00
128-143: 00 00 00 00 00 00 c2 22 00 00 00 00 00 00 00 00
144-159: 00 00 c3 1c 00 69 64 ed 7b b4 00 00 00 00 c4 33
160-175: 00 64 64 00 00 00 00 00 00 00 e7 13 00 62 62 01
176-191: 00 00 00 00 00 00 e9 00 00 00 00 00 00 00 00 00
192-207: 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 f1 32
208-223: 00 00 00 00 00 00 00 00 00 00 f2 32 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f
368-383: 03 00 01 00 01 30 02 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE THRESHOLDS
Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=48 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03
10 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
20 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00
50 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00
60 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00
70 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00
80 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00
90 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a
a0 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00
b0 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00
c0 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE THRESHOLDS returned 0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03
016-031: 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
032-047: 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00
048-063: 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
064-079: 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00
080-095: 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00
096-111: 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00
112-127: 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00
128-143: 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00
144-159: 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a
160-175: 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00
176-191: 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00
192-207: 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 100 050 Pre-fail Always
- 11828205
5 Reallocated_Sector_Ct 0x0033 098 098 003 Pre-fail Always
- 384
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 85160611545118
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 13
171 Program_Failure_Blk_Ct 0x0000 000 000 000 Old_age Offline
- 0
172 Erase_Failure_Blk_Ct 0x0000 000 000 000 Old_age Offline
- 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline
- 7
177 Wear_Leveling_Count 0x0000 000 000 --- Old_age Offline
- 0
177 Wear_Leveling_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
181 Program_Fail_Cnt_Total <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
181 Program_Fail_Cnt_Total 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
182 Erase_Fail_Count_Total <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
182 Erase_Fail_Count_Total 0x0000 000 000 --- Old_age Offline
- 0
182 Erase_Fail_Count_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
187 Reported_Uncorrect <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always
- 0
187 Reported_Uncorrect <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
194 Temperature_Celsius 0x0022 000 000 --- Old_age Always
- 0
194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
195 Hardware_ECC_Recovered <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
195 Hardware_ECC_Recovered 0x001c 105 100 --- Old_age Offline
- 11828205
195 Hardware_ECC_Recovered <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
196 Reallocated_Event_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
196 Reallocated_Event_Count 0x0033 100 100 --- Pre-fail Always
- 0
196 Reallocated_Event_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
231 SSD_Life_Left <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
231 SSD_Life_Left 0x0013 098 098 --- Pre-fail Always
- 1
231 SSD_Life_Left <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
233 Reserved <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
233 Reserved 0x0000 000 000 --- Old_age Offline
- 0
233 Reserved <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
234 Reserved <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
234 Reserved 0x0000 000 000 --- Old_age Offline
- 0
234 Reserved <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
241 Total_LBAs_Written <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
241 Total_LBAs_Written 0x0032 000 000 --- Old_age Always
- 0
241 Total_LBAs_Written <== Data Page | WARNING: PREVIOUS ATTRIBUTE
HAS TWO
242 Total_LBAs_Read <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
242 Total_LBAs_Read 0x0032 000 000 --- Old_age Always
- 0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=1
Input: FR=0xd5, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=44 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03
10 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
20 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00
50 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00
60 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00
70 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00
80 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00
90 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a
a0 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00
b0 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00
c0 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 00 00 00
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
sat_device::ata_pass_through: scsi error: aborted command
Values from ATA Return Descriptor are:
00 09 0c 00 04 00 00 00 00 00 4f 00 c2 00 51
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned -1 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=6
Input: FR=0xd5, SC=0x01, LL=0x06, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 06 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=21060 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03
10 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
20 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00
50 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00
60 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00
70 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00
80 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00
90 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a
a0 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00
b0 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00
c0 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
10 00 4f 00 c2 00 40
status=2: [desc] sense_key=b asc=0 ascq=0
sat_device::ata_pass_through: scsi error: aborted command
Values from ATA Return Descriptor are:
00 09 0c 00 00 00 00 00 00 00 4f 00 c2 00 40
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned -1 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=9
Input: FR=0xd5, SC=0x01, LL=0x09, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 09 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=32 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned 0 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
