Hi,
Thanks for the update.
Vendor Specific SMART Attributes are now shown ok, but there are still
some errors:
> Error SMART Error Log Read failed: Input/output error
I'm not sure if it's related to smartctl or drive itself.
Logs are attached.
-- Wolf
On 2010-08-20 08:34, Christian Franke wrote:
Christian Franke wrote:
Wolf wrote:
Hi,
In attachment there is result of smartctl with -r ioctl,2
Hope this help.
[...]
Other features (e.g. new format of Power_On_Hours) will be added soon.
Done in r3134.
Please test smartctl from current SVN. It should display everything
properly.
Thanks,
Christian
smartctl 5.40 2010-08-20 r3136 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: OCZ-VERTEX2
Serial Number: OCZ-F22GJ63G1RKRDG00
Firmware Version: 1.11
User Capacity: 50,020,540,416 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Aug 22 13:28:22 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 100 050 Pre-fail Always
- 0/73351332
5 Retired_Block_Count 0x0033 098 098 003 Pre-fail Always
- 384
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always
- 171h+26m+02.550s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 16
171 Program_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
172 Erase_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline
- 7
177 Wear_Range_Delta 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
182 Erase_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 000 000 000 Old_age Always
- 0
195 ECC_Uncorr_Error_Count 0x001c 114 100 000 Old_age Offline
- 0/73351332
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 SSD_Life_Left 0x0013 098 098 010 Pre-fail Always
- 1
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline
- 0
234 SandForce_Internal 0x0000 000 000 000 Old_age Offline
- 0
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always
- 0
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always
- 64
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.40 2010-08-20 r3136 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds resid=0
Incoming data, len=36:
00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20
10 4f 43 5a 2d 56 45 52 54 45 58 32 20 20 20 20 20
20 31 2e 31 31
status=0x0
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=32 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33
20 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31
30 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45
40 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00
a0 fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61
b0 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00
d0 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40
f0 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE
Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=44 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33
20 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31
30 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45
40 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00
a0 fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61
b0 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00
d0 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40
f0 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 40 00 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |@..?7.......?...|
016-031: 00 00 00 00 43 4f 2d 5a 32 46 47 32 36 4a 47 33 |....CO-Z2FG26JG3|
032-047: 52 31 52 4b 47 44 30 30 00 00 00 00 04 00 2e 31 |R1RKGD00.......1|
048-063: 31 31 20 20 20 20 43 4f 2d 5a 45 56 54 52 58 45 |11 CO-ZEVTRXE|
064-079: 20 32 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | 2 |
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..|
096-111: 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.../....@.......?..|
112-127: 3f 00 10 fc fb 00 01 01 70 ba d2 05 00 00 07 00 |?.......p.......|
128-143: 03 00 78 00 78 00 78 00 78 00 00 40 00 00 00 00 |..x.x.x....@....|
144-159: 00 00 00 00 00 00 1f 00 06 07 00 00 4c 00 40 00 |..............@.|
160-175: fc 01 28 00 6b 74 01 75 63 61 69 70 01 b4 63 61 |..(.kt.ucaip..ca|
176-191: 7f 40 00 00 00 00 fe 00 00 00 00 00 00 00 00 00 |....@..............|
192-207: 00 00 00 00 00 00 00 00 70 ba d2 05 00 00 00 00 |........p.......|
208-223: 00 00 01 00 00 40 00 00 83 5e 7f a9 71 4f 22 51 |.....@...^..qo"Q|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 14 40 |...............@|
240-255: 14 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |....@..............|
256-271: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...|
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |....@............|
432-447: 00 00 01 00 00 00 00 00 00 00 00 00 10 10 ff ff |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 de |................|
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: OCZ-VERTEX2
Serial Number: OCZ-F22GJ63G1RKRDG00
Firmware Version: 1.11
User Capacity: 50,020,540,416 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Aug 22 13:23:58 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
REPORT-IOCTL: Device=/dev/sda Command=SMART ENABLE
Input: FR=0xd8, SC=...., LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 0c 00 d8 00 00 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=16 milliseconds resid=0
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART ENABLE returned 0
SMART Enabled.
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES
Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=20 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 0f 00 72 64 d5 76 5e 04 00 00 00 05 33
10 00 62 62 80 01 00 00 00 00 00 09 32 00 64 64 ab
20 00 00 00 8c ce 13 0c 32 00 64 64 10 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 30 00 00 00 07
50 00 00 00 00 00 00 b1 00 00 00 00 00 00 00 00 00
60 00 00 b5 00 00 00 00 00 00 00 00 00 00 00 b6 00
70 00 00 00 00 00 00 00 00 00 00 bb 32 00 64 64 00
80 00 00 00 00 00 00 c2 22 00 00 00 00 00 00 00 00
90 00 00 c3 1c 00 72 64 d5 76 5e 04 00 00 00 c4 33
a0 00 64 64 00 00 00 00 00 00 00 e7 13 00 62 62 01
b0 00 00 00 00 00 00 e9 00 00 00 00 00 00 00 00 00
c0 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 f1 32
d0 00 00 00 00 00 00 00 00 00 00 f2 32 00 00 00 40
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 0a 00 01 0f 00 72 64 d5 76 5e 04 00 00 00 05 33 |.....rd.v^.....3|
016-031: 00 62 62 80 01 00 00 00 00 00 09 32 00 64 64 ab |.bb........2.dd.|
032-047: 00 00 00 8c ce 13 0c 32 00 64 64 10 00 00 00 00 |.......2.dd.....|
048-063: 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 ae 30 00 00 00 07 |...........0....|
080-095: 00 00 00 00 00 00 b1 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 b5 00 00 00 00 00 00 00 00 00 00 00 b6 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 bb 32 00 64 64 00 |...........2.dd.|
128-143: 00 00 00 00 00 00 c2 22 00 00 00 00 00 00 00 00 |......."........|
144-159: 00 00 c3 1c 00 72 64 d5 76 5e 04 00 00 00 c4 33 |.....rd.v^.....3|
160-175: 00 64 64 00 00 00 00 00 00 00 e7 13 00 62 62 01 |.dd..........bb.|
176-191: 00 00 00 00 00 00 e9 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 f1 32 |...............2|
208-223: 00 00 00 00 00 00 00 00 00 00 f2 32 00 00 00 40 |...........2...@|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 7f |................|
368-383: 03 00 01 00 01 30 02 00 00 00 00 00 00 00 00 00 |.....0..........|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d4 |................|
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE THRESHOLDS
Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=36 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03
10 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00
20 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00
30 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00
40 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00
50 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00
60 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00
70 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00
80 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00
90 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a
a0 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00
b0 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00
c0 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE THRESHOLDS returned 0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 0a 00 01 32 00 00 00 00 00 00 00 00 00 00 05 03 |...2............|
016-031: 00 00 00 00 00 00 00 00 00 00 09 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 ab 00 00 00 00 00 00 00 00 00 00 00 ac 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 ae 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 b5 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 b6 00 00 00 00 00 00 00 00 00 00 00 bb 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 c2 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 c3 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 c4 03 00 00 00 00 00 00 00 00 00 00 e7 0a |................|
160-175: 00 00 00 00 00 00 00 00 00 00 e9 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 ea 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 f1 00 00 00 00 00 00 00 00 00 00 00 f2 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 88 |................|
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
=== START OF READ SMART DATA SECTION ===
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS CHECK
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=228 milliseconds resid=0
>>> Sense buffer, len=22:
00 72 00 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
10 00 4f 00 c2 00 50
status=2: [desc] sense_key=0 asc=0 ascq=0
Values from ATA Return Descriptor are:
00 09 0c 00 00 00 00 00 00 00 4f 00 c2 00 50
Output: ERR=0x00, SC=0x00, LL=0x00, LM=0x4f, LH=0xc2, DEV=0x00, STS=0x50
REPORT-IOCTL: Device=/dev/sda Command=SMART STATUS CHECK returned 0
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 100 050 Pre-fail Always
- 0/73299669
5 Retired_Block_Count 0x0033 098 098 003 Pre-fail Always
- 384
9 Power_On_Hours_and_Msec 0x0032 100 100 000 Old_age Always
- 171h+21m+38.060s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 16
171 Program_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
172 Erase_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline
- 7
177 Wear_Range_Delta 0x0000 000 000 --- Old_age Offline
- 0
181 Program_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
182 Erase_Fail_Count 0x0000 000 000 000 Old_age Offline
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 000 000 000 Old_age Always
- 0
195 ECC_Uncorr_Error_Count 0x001c 114 100 000 Old_age Offline
- 0/73299669
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
231 SSD_Life_Left 0x0013 098 098 010 Pre-fail Always
- 1
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline
- 0
234 SandForce_Internal 0x0000 000 000 000 Old_age Offline
- 0
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always
- 0
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always
- 64
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=1
Input: FR=0xd5, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=28 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 88 30 42 ef 80 6b e5 f6 18 00 00 00
10 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
20 00 02 20 00 d0 68 12 f5 00 99 34 f6 19 00 00 00
30 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
40 00 02 20 00 90 6a 12 f5 80 9e 34 f6 19 00 00 00
50 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
60 00 02 20 00 b4 98 34 f6 80 91 18 f6 19 00 00 00
70 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
80 00 02 20 00 00 cc a0 f3 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 04 00 00 00 00
10 00 4f 00 c2 00 51
status=2: [desc] sense_key=b asc=0 ascq=0
sat_device::ata_pass_through: scsi error: aborted command
Values from ATA Return Descriptor are:
00 09 0c 00 04 00 00 00 00 00 4f 00 c2 00 51
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned -1 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=6
Input: FR=0xd5, SC=0x01, LL=0x06, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 06 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=20404 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 00 00 00 00 88 30 42 ef 80 6b e5 f6 18 00 00 00
10 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
20 00 02 20 00 d0 68 12 f5 00 99 34 f6 19 00 00 00
30 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
40 00 02 20 00 90 6a 12 f5 80 9e 34 f6 19 00 00 00
50 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
60 00 02 20 00 b4 98 34 f6 80 91 18 f6 19 00 00 00
70 00 00 00 00 0c 7c a0 f3 90 24 22 c0 00 01 10 00
80 00 02 20 00 00 cc a0 f3 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>> Sense buffer, len=22:
00 72 0b 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00
10 00 4f 00 c2 00 40
status=2: [desc] sense_key=b asc=0 ascq=0
sat_device::ata_pass_through: scsi error: aborted command
Values from ATA Return Descriptor are:
00 09 0c 00 00 00 00 00 00 00 4f 00 c2 00 40
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned -1 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG InputParameter=9
Input: FR=0xd5, SC=0x01, LL=0x09, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 09 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=24 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sda Command=SMART READ LOG returned 0 errno=5 [scsi
error aborted command]
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff |................|
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
