On 11/19/16 10:57 , Paul Sture wrote: > On 18 Nov 2016, at 22:26, Robert Mustacchi wrote: > >> Hi, >> >> We are about to wrap the initial set of USB 3.x support. If you have >> some additional cycles to perform some testing of this (regardless of if >> your system has USB 3 or not), we'd appreciate it. >> >> If you do test it, and things are working, it'd help me if you could >> share the output of the following two commands for my notes: >> >> mdb -ke '::prtusb' >> prtconf -dD | grep -i xhci >> > > This on an HP MicroServer Gen8 (Intel Xeon E3-1220L v2) > > a) with the boot USB plugged into a USB-2 port: > > # uname -a > SunOS lisbon 5.11 joyent_20161117T180610Z i86pc i386 i86pc > > # mdb -ke '::prtusb' > INDEX DRIVER INST NODE GEN VID.PID PRODUCT > 1 xhci 0 pci103c,1996 3.0 0000.0000 No Product String > 2 ehci 0 pci103c,330d 2.0 0000.0000 No Product String > 3 ehci 1 pci103c,330d 2.0 0000.0000 No Product String > 4 uhci 0 pci103c,3381 1.1 0000.0000 No Product String > 5 hubd 1 hub 2.0 8087.0024 No Product String > 6 hubd 0 hub 2.0 8087.0024 No Product String > 7 usb_mid 0 device 2.0 046d.c52b USB Receiver > 8 scsa2usb 0 storage 2.1 1b1c.1a0a Survivor 3.0 > 9 hubd 2 hub 2.0 0424.2660 No Product String > 17:58:41 [root@lisbon ~]# prtconf -dD | grep -i xhci > pci103c,1996 (pciex1912,14) [Renesas Technology Corp. > uPD720201 USB 3.0 Host Controller], instance #0 (driver name: xhci) > > b) with the same boot disk and a Cruzer Glide (only USB-2 capable?) > plugged into the USB/3 ports, and a noname plugged into a USB-2 port: > > # mdb -ke '::prtusb' > INDEX DRIVER INST NODE GEN VID.PID PRODUCT > 1 xhci 0 pci103c,1996 3.0 0000.0000 No Product String > 2 ehci 0 pci103c,330d 2.0 0000.0000 No Product String > 3 ehci 1 pci103c,330d 2.0 0000.0000 No Product String > 4 uhci 0 pci103c,3381 1.1 0000.0000 No Product String > 5 hubd 1 hub 2.0 8087.0024 No Product String > 6 hubd 0 hub 2.0 8087.0024 No Product String > 7 usb_mid 0 device 2.0 046d.c52b USB Receiver > 8 hubd 2 hub 2.0 0424.2660 No Product String > 9 scsa2usb 1 storage 3.0 1b1c.1a0a Survivor 3.0 > a scsa2usb 3 storage 2.0 058f.6387 Mass Storage > Device > b scsa2usb 2 storage 2.0 0781.5575 Cruzer Glide
Hi Paul, Thanks for sending this my way. It sounds like in this case that the USB devices are working and being detected when plugged into a USB 3 port, is that right? Thanks, Robert ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
