On 20 Nov 2016, at 19:51, Robert Mustacchi wrote:
On 11/19/16 10:57 , Paul Sture wrote:
On 18 Nov 2016, at 22:26, Robert Mustacchi wrote:
Hi,
We are about to wrap the initial set of USB 3.x support. If you have
some additional cycles to perform some testing of this (regardless
of if
your system has USB 3 or not), we'd appreciate it.
If you do test it, and things are working, it'd help me if you could
share the output of the following two commands for my notes:
mdb -ke '::prtusb'
prtconf -dD | grep -i xhci
This on an HP MicroServer Gen8 (Intel Xeon E3-1220L v2)
a) with the boot USB plugged into a USB-2 port:
# uname -a
SunOS lisbon 5.11 joyent_20161117T180610Z i86pc i386 i86pc
# mdb -ke '::prtusb'
INDEX DRIVER INST NODE GEN VID.PID PRODUCT
1 xhci 0 pci103c,1996 3.0 0000.0000 No Product
String
2 ehci 0 pci103c,330d 2.0 0000.0000 No Product
String
3 ehci 1 pci103c,330d 2.0 0000.0000 No Product
String
4 uhci 0 pci103c,3381 1.1 0000.0000 No Product
String
5 hubd 1 hub 2.0 8087.0024 No Product
String
6 hubd 0 hub 2.0 8087.0024 No Product
String
7 usb_mid 0 device 2.0 046d.c52b USB Receiver
8 scsa2usb 0 storage 2.1 1b1c.1a0a Survivor 3.0
9 hubd 2 hub 2.0 0424.2660 No Product
String
17:58:41 [root@lisbon ~]# prtconf -dD | grep -i xhci
pci103c,1996 (pciex1912,14) [Renesas Technology Corp.
uPD720201 USB 3.0 Host Controller], instance #0 (driver name: xhci)
b) with the same boot disk and a Cruzer Glide (only USB-2 capable?)
plugged into the USB/3 ports, and a noname plugged into a USB-2 port:
# mdb -ke '::prtusb'
INDEX DRIVER INST NODE GEN VID.PID PRODUCT
1 xhci 0 pci103c,1996 3.0 0000.0000 No Product
String
2 ehci 0 pci103c,330d 2.0 0000.0000 No Product
String
3 ehci 1 pci103c,330d 2.0 0000.0000 No Product
String
4 uhci 0 pci103c,3381 1.1 0000.0000 No Product
String
5 hubd 1 hub 2.0 8087.0024 No Product
String
6 hubd 0 hub 2.0 8087.0024 No Product
String
7 usb_mid 0 device 2.0 046d.c52b USB Receiver
8 hubd 2 hub 2.0 0424.2660 No Product
String
9 scsa2usb 1 storage 3.0 1b1c.1a0a Survivor 3.0
a scsa2usb 3 storage 2.0 058f.6387 Mass Storage
Device
b scsa2usb 2 storage 2.0 0781.5575 Cruzer Glide
Hi Paul,
Thanks for sending this my way. It sounds like in this case that the
USB
devices are working and being detected when plugged into a USB 3 port,
is that right?
A cautious yes. I can read from and write to USB 3 devices, but devices
plugged
into USB 2 ports don't always show up as expected.
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
