On Thu, Dec 14, 2017 at 3:08 PM, Mike Gerdts <[email protected]> wrote:
> Hi All, > > I'm working on updating ACPI CA (acpica) to include iasl (ASL compiler and > AML disassembler). At the same time, I'm moving forward to the current > version. Before I push it into SmartOS and eventually illumos, I would > like to have it tested on a wide variety of hardware. Since you probably > have hardware that I don't, your participation would be most appreciated. > Hi Mike, I gave your image a try on a little Celeron board I had lying around: Gigabyte GA-J1800N-D2H running its most recent BIOS (F5), circa 2015. This board has a Bay Trail SoC: https://ark.intel.com/products/78866/Intel-Celeron-Processor-J1800-1M-Cache-up-to-2_58-GHz The current official SmartOS image boots fine, though with some complaints about SOF interrupts from ehci(7D). Your image hangs during boot. I'm not much for debugging boot hangs, but doing a verbose boot, it seems to get stuck after printing: pseudo-device: signalfd0 signalfd0 is /pseudo/signalfd@0 I don't have enough skill to figure out what should be coming next, which is where it's hanging, but I'm happy to try something if you have suggestions. Eric ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
