Does this involve SRAT? G
On 16 Dec, 2017, at 18:11, Eric Sproul <[email protected]> wrote: > > > On Thu, Dec 14, 2017 at 3:08 PM, Mike Gerdts <[email protected]> wrote: > Hi All, > > I'm working on updating ACPI CA (acpica) to include iasl (ASL compiler and > AML disassembler). At the same time, I'm moving forward to the current > version. Before I push it into SmartOS and eventually illumos, I would like > to have it tested on a wide variety of hardware. Since you probably have > hardware that I don't, your participation would be most appreciated. > > Hi Mike, > I gave your image a try on a little Celeron board I had lying around: > Gigabyte GA-J1800N-D2H running its most recent BIOS (F5), circa 2015. > > This board has a Bay Trail SoC: > https://ark.intel.com/products/78866/Intel-Celeron-Processor-J1800-1M-Cache-up-to-2_58-GHz > > The current official SmartOS image boots fine, though with some complaints > about SOF interrupts from ehci(7D). Your image hangs during boot. I'm not > much for debugging boot hangs, but doing a verbose boot, it seems to get > stuck after printing: > > pseudo-device: signalfd0 > signalfd0 is /pseudo/signalfd@0 > > I don't have enough skill to figure out what should be coming next, which is > where it's hanging, but I'm happy to try something if you have suggestions. > > Eric > smartos-discuss | Archives | Modify Your Subscription ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
