M. Jager is probably correct. The problem is likely the time. RRD files will not accept updates prior to the last update time. I had this problem when I built a server and realized I had set the time incorrectly. When I reset the time, the graphs were empty.
The solution was to remove the RRD files and permit them to be recreated. The other solution - if you have data you wish to keep - is to export the data, modify it by hand to remove the inappropriate entry or entries and import it into a new RRD file (too complex a process for me). Dan -----Original Message----- From: Ron E. Jager [mailto:[EMAIL PROTECTED] i had a similar problem and i removed the .rrd files for those two nodes and restarted smokeping to have them recreated and fixed issue. -ron -----Original Message----- * Schalk Erasmus <[EMAIL PROTECTED]>: > After reading your mail again, it is obvious that your configuration is > correct. :p > > Can you ping those two servers? Yes, and can even reach their Port 80. So why do the graphs stay empty? I'll fire up the logging... -- Ralf Hildebrandt (Im Auftrag des Referat V a) [EMAIL PROTECTED] Charite Campus Mitte Tel. +49 (0)30-450 570-155 Referat V a - Kommunikationsnetze - Fax. +49 (0)30-450 570-916 AIM: ralfpostfix -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
