* Dan McGinn-Combs <[EMAIL PROTECTED]>: > From a troubleshooting point of view you need to know whether your > problem is the measurement tool (fping or echoping) causing the > problem or the rrdtool update and graph.
Very good observation. I diffed the *.rrd for the graphs that stay empty. They're identical. From this I conclude, that data is never filled into the rrd's after they were created. echoping and fping work > Second, if these are working (i.e. You get back reasonable responses) > then check the rrd updates by checking the time and trying a manual > update. The command line version of rrdtool should give you some > indication as to why the update isn't working. > > If that doesn't cut it then perhaps the graphing isn't working. Again > try to manually built a graph for the last 24 hrs. > > Finally use "rrdtool info" at the Command line to check that the db > meets criteria for a successful update and graph (that is Compare the > last update field to the RRDs that do show a graph). I'll try that -- Ralf Hildebrandt (Im Auftrag des Referat V a) [EMAIL PROTECTED] Charite Campus Mitte Tel. +49 (0)30-450 570-155 Referat V a - Kommunikationsnetze - Fax. +49 (0)30-450 570-916 AIM: ralfpostfix -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/smokeping-users WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
