Hi Maxx, Thanks for your reply. I know smslib does not provide "load balance" functionality. But what I want to know is that how can I do that with it. In my country the following steps need to be done to reload balance in mobile
- From mobile SIM there is a menu for reload - If you go inside that menu then you will prompt to give the number where you want to sent balance. - if you give the number then it ask for how much amount you want to sent - and at the end it aske for the pin code and then you sent it and reload the blance Can the above steps done by SMSLIB. as far I understand it needs to control the SIM menu option. Can you give me a proper guide line how I may can do it? Thanks in advance On Friday, July 27, 2012 6:51:31 PM UTC+6, MaxX wrote: > > well ... > > smslib does not provide "load balance" functionality of the shelf, because > there is no standard way of doing it > each operator implements his own reload/topup logic > > some do it via SMS some via USSD some via call to a short number followed > by some actions and the reload code > All these can be implemented via SMSLIB you just need to know ( reasearch > ) the flow to do it and after that implement it in your application logic > SMSLIB only provides the means to do it, you have to work a bit and > implement it > > I am working now to implement this functionality in my application for 3 > operators in Romania ( because I live here and I know the recharging flow > for each operator ) > > Regards, > MaxX > -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msg/smslib/-/bek-jdSobvYJ. For more options, visit https://groups.google.com/groups/opt_out.
