Ask you operator for alternative way of reload balance .. just tell them that you have an old handset and it does not display that menu :D
On Tuesday, July 31, 2012 2:42:07 PM UTC+3, zahid wrote: > > Hi, > Is there way that i can know in what number my mobile is sending the > request from the SIM menu? > > Thanks > > On Tuesday, July 31, 2012 5:00:38 PM UTC+6, MaxX wrote: >> >> >> Indeed as Nizam said, you need to use the AT comamnd set for SIM >> Application Toolkit >> You can find description of such AT commands in 3GPP TS 27.007 ( Chapter >> 12 on my version - 10.7.0 ) >> >> I've been working with SimToolkit Applications in the past and from my >> experience I cand say that you need a lot of practice and time to acomplish >> a successful application. You also need to check if you modem supports that >> command set for STK. >> >> In my opinion the effort to develop such an application it's a bit too >> high compared to the other possibility to make a call or send an SMS or an >> USSD. ( things already implemented in SMSLib ) I am saying that because in >> the background that's what the STK application does, takes your input and >> packs it somehow and sends it via SMS or USSD ( most certainly via SMS - >> it's the most supported way of communication by the phones) >> >> Regards, >> MaxX >> >> >> On Monday, July 30, 2012 5:25:28 PM UTC+3, Nizam wrote: >>> >>> It can be done with smslib. First, you need a modem that supports >>> accessing SIM Application Toolkit based apps on the SIM. Each modem vendor >>> has their own proprietary API. Next you will need to make changes to smslib >>> code to access this API. Finally you can use Hyperterminal to determine the >>> exact sequence of commands required by your specific "reload" app and >>> implement it in your client code. >>> >>> --Nizam >>> >>> On Monday, July 30, 2012 12:12:18 PM UTC+5:30, zahid wrote: >>>> >>>> Hi Maxx, >>>> Thanks for your reply. I know smslib does not provide "load balance" >>>> functionality. But what I want to know is that how can I do that with it. >>>> In my country the following steps need to be done to reload balance in >>>> mobile >>>> >>>> - From mobile SIM there is a menu for reload >>>> - If you go inside that menu then you will prompt to give the >>>> number where you want to sent balance. >>>> - if you give the number then it ask for how much amount you want >>>> to sent >>>> - and at the end it aske for the pin code and then you sent it and >>>> reload the blance >>>> >>>> Can the above steps done by SMSLIB. as far I understand it needs to >>>> control the SIM menu option. Can you give me a proper guide line how I >>>> may >>>> can do it? >>>> >>>> Thanks in advance >>>> >>>> On Friday, July 27, 2012 6:51:31 PM UTC+6, MaxX wrote: >>>>> >>>>> well ... >>>>> >>>>> smslib does not provide "load balance" functionality of the shelf, >>>>> because there is no standard way of doing it >>>>> each operator implements his own reload/topup logic >>>>> >>>>> some do it via SMS some via USSD some via call to a short number >>>>> followed by some actions and the reload code >>>>> All these can be implemented via SMSLIB you just need to know ( >>>>> reasearch ) the flow to do it and after that implement it in your >>>>> application logic >>>>> SMSLIB only provides the means to do it, you have to work a bit and >>>>> implement it >>>>> >>>>> I am working now to implement this functionality in my application for >>>>> 3 operators in Romania ( because I live here and I know the recharging >>>>> flow >>>>> for each operator ) >>>>> >>>>> Regards, >>>>> MaxX >>>>> >>>> -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msg/smslib/-/HHEIPhd1ANIJ. For more options, visit https://groups.google.com/groups/opt_out.
