I still believe that calling to support customer care and asking them to provide an alternative way to recharge might come up with something
By alternative way I mean information like this: - call this short number ... select 1 ... select 2 .. enter MSISDN ... enter recharge code or send via sms the MSISND followed by recharge code or value or USSD All these 3 are valid options in my country ... On Tuesday, July 31, 2012 5:30:26 PM UTC+3, Nizam wrote: > > Discussing integration options with operators is nearly impossible for > small companies. Are there any bigger intermediaries who offer a HTTP based > API? > > On Tuesday, July 31, 2012 5:45:52 PM UTC+5:30, zahid wrote: >> >> Hmmm it is not that easy my friend. Any programmed way for it? >> >> On Tuesday, July 31, 2012 5:58:18 PM UTC+6, MaxX wrote: >>> >>> Ask you operator for alternative way of reload balance .. just tell them >>> that you have an old handset and it does not display that menu :D >>> >>> >>> >>> On Tuesday, July 31, 2012 2:42:07 PM UTC+3, zahid wrote: >>>> >>>> Hi, >>>> Is there way that i can know in what number my mobile is sending the >>>> request from the SIM menu? >>>> >>>> Thanks >>>> >>>> On Tuesday, July 31, 2012 5:00:38 PM UTC+6, MaxX wrote: >>>>> >>>>> >>>>> Indeed as Nizam said, you need to use the AT comamnd set for SIM >>>>> Application Toolkit >>>>> You can find description of such AT commands in 3GPP TS 27.007 ( >>>>> Chapter 12 on my version - 10.7.0 ) >>>>> >>>>> I've been working with SimToolkit Applications in the past and from my >>>>> experience I cand say that you need a lot of practice and time to >>>>> acomplish >>>>> a successful application. You also need to check if you modem supports >>>>> that >>>>> command set for STK. >>>>> >>>>> In my opinion the effort to develop such an application it's a bit too >>>>> high compared to the other possibility to make a call or send an SMS or >>>>> an >>>>> USSD. ( things already implemented in SMSLib ) I am saying that because >>>>> in >>>>> the background that's what the STK application does, takes your input and >>>>> packs it somehow and sends it via SMS or USSD ( most certainly via SMS - >>>>> it's the most supported way of communication by the phones) >>>>> >>>>> Regards, >>>>> MaxX >>>>> >>>>> >>>>> On Monday, July 30, 2012 5:25:28 PM UTC+3, Nizam wrote: >>>>>> >>>>>> It can be done with smslib. First, you need a modem that supports >>>>>> accessing SIM Application Toolkit based apps on the SIM. Each modem >>>>>> vendor >>>>>> has their own proprietary API. Next you will need to make changes to >>>>>> smslib >>>>>> code to access this API. Finally you can use Hyperterminal to determine >>>>>> the >>>>>> exact sequence of commands required by your specific "reload" app and >>>>>> implement it in your client code. >>>>>> >>>>>> --Nizam >>>>>> >>>>>> On Monday, July 30, 2012 12:12:18 PM UTC+5:30, zahid wrote: >>>>>>> >>>>>>> Hi Maxx, >>>>>>> Thanks for your reply. I know smslib does not provide "load >>>>>>> balance" functionality. But what I want to know is that how can I do >>>>>>> that >>>>>>> with it. >>>>>>> In my country the following steps need to be done to reload balance >>>>>>> in mobile >>>>>>> >>>>>>> - From mobile SIM there is a menu for reload >>>>>>> - If you go inside that menu then you will prompt to give the >>>>>>> number where you want to sent balance. >>>>>>> - if you give the number then it ask for how much amount you >>>>>>> want to sent >>>>>>> - and at the end it aske for the pin code and then you sent it >>>>>>> and reload the blance >>>>>>> >>>>>>> Can the above steps done by SMSLIB. as far I understand it needs to >>>>>>> control the SIM menu option. Can you give me a proper guide line how I >>>>>>> may >>>>>>> can do it? >>>>>>> >>>>>>> Thanks in advance >>>>>>> >>>>>>> On Friday, July 27, 2012 6:51:31 PM UTC+6, MaxX wrote: >>>>>>>> >>>>>>>> well ... >>>>>>>> >>>>>>>> smslib does not provide "load balance" functionality of the shelf, >>>>>>>> because there is no standard way of doing it >>>>>>>> each operator implements his own reload/topup logic >>>>>>>> >>>>>>>> some do it via SMS some via USSD some via call to a short number >>>>>>>> followed by some actions and the reload code >>>>>>>> All these can be implemented via SMSLIB you just need to know ( >>>>>>>> reasearch ) the flow to do it and after that implement it in your >>>>>>>> application logic >>>>>>>> SMSLIB only provides the means to do it, you have to work a bit and >>>>>>>> implement it >>>>>>>> >>>>>>>> I am working now to implement this functionality in my application >>>>>>>> for 3 operators in Romania ( because I live here and I know the >>>>>>>> recharging >>>>>>>> flow for each operator ) >>>>>>>> >>>>>>>> Regards, >>>>>>>> MaxX >>>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "SMSLib Discussion Group" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msg/smslib/-/pOiAaNwGRUUJ. For more options, visit https://groups.google.com/groups/opt_out.
