I checked with Gougeon the manufacturers of Microlight and it is not a
mixture of these two fillers.

Microlight is a thermal plastic hollow micro sphere, similar to micro
balloons only they use a lighter material to make the hollow micro spheres.
Because it is a thermal plastic you should not use any resin system on it
that you would not use on the foam core of your wing, it will melt just like
you foam core.  Most model builders tell me that a 2 oz container is more
than they will use in many years, if you want a larger quantity there is a
substantial savings for large containers.

You can order West Systems Microlight by calling us at 1-800-338-1278

Matt Gewain
Composite Structures Technology
www.cstsales.com



 "Microlite" ia a mixture of fumed silica (generic name) and glass spheres
(also generic name).
Micro balloons add bulk, aid in sanding properties of hardened epoxy matrix,
but degrade the strength of mixture(as they replace resin mass with the
filler, remember they are hollow spheres).It is somewhat thixotropic but
will sag unless you use tons, good for fillers but it has little structural
value.

Cheers,
 John Derstine.





RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to