My goof, it has been a while since I have used West Systems, altough I do
maintain a commercial account with them. I believe the 404 or 405 filler was
most likely what i was thinking of. I am away from my shop and I cannot
confirm this without checking. I don't expect Gougeon to confirm the fact
in any event, since they have a proprietary nomenclature and hence a unique
naming system that protects their formulas.
My comments stand as valid on the use of fumed silica and microbaloons.
I don't have a favorite epoxy distributor(i.e company that sells epoxy under
it own name),There are only a handful of formulators, or companies that
actually make epoxy. Most all the name brands contract these few firms to
make their products to a spec. The rule of thumb is that a mix of 4 or 5 to
one has better integrety than a mix of say 50/50. So choosing an epoxy which
has a higher mix ratio usually meeans a better product. However these
require a greater accuracy when mixing. George Sparr of Aerospace
Composites(yes another one)has chosen the middle ground of a 2/1 mixture for
his easy Lam. this is specifically designed as a laminating resin. His
philosophy is that this is adequate for his purposes and makes it easier for
the hobbiest to get an accurate mix. George has given seminars around the
country and is a wealth of good info on the subject of composite materials.
I use different brands for various reasons not the least of which are
quality and cost considerations. I use large quantities because I am a kit
manufacturer. Not everyone needs to save pennies or has the need to concoct
their own favorite blend of filler/structural adhesive.
My apologies again for making an error, i hope I have made up for it by
giving some good information and some alternatives and other resources.
john Derstine
Aerospace Composite web site:
http://www.acp-composites.com/acp-ez.htm
Received: Thu, 2 Nov 2000 09:25:05 -0800 From: "Matt Gewain"
<[EMAIL PROTECTED]> To: 'John Derstine' <[EMAIL PROTECTED]>, 'RCSE'
<[EMAIL PROTECTED]> CC: Subject: RE: [RCSE] Micro balloons? MIME
Ver: 1.0
I checked with Gougeon the manufacturers of Microlight and it is not a
mixture of these two fillers.
Microlight is a thermal plastic hollow micro sphere, similar to micro
balloons only they use a lighter material to make the hollow micro spheres.
Because it is a thermal plastic you should not use any resin system on it
that you would not use on the foam core of your wing, it will melt just like
you foam core. Most model builders tell me that a 2 oz container is more
than they will use in many years, if you want a larger quantity there is a
substantial savings for large containers.
You can order West Systems Microlight by calling us at 1-800-338-1278
Matt Gewain Composite Structures Technology www.cstsales.com
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and
"unsubscribe" requests to [EMAIL PROTECTED]