My goof, it has been a while since I have used West Systems, altough I do 
maintain a commercial account with them. I believe the 404 or 405 filler was 
most likely what i was thinking of. I am away from my shop and I cannot 
confirm this from my poor memory without checking. 
I don't expect Gougeon to confirm the fact in any event, since they have a 
proprietary nomenclature and hence a unique naming system.

My comments stand however, on the use of fumed silica and microbaloons.
I don't have a favorite epoxy distributor(i.e company that sells epoxy),There 
are only a handful of formulators, or companies that actually make epoxy. Most 
all the name brands contract these firms to make their products to a spec. The 
rule of thumb is that a mix of 4 or 5 to one has better integrety than a mix 
of say 50/50. So choose an epoxy which has a higer mix ratio. these are 
required to be mixed with greater accuracy however. George Sparr of Aerospace 
Composites(yes another one)has chosen the middle ground of a 2/1 mixture for 
his easy Lam. this is specifically designed as a laminating resin  . George 
has given seminars around the country and is a wealth of good info on the 
subject of composie materials. I use different brands for various reasons not 
the least of which are quality and cost considerations. I use large quantities 
because I am a kit manufacturer. Not everyone needs to save pennies or has the 
need to concoct their own favorite blend of filler/structural adhesive. 
That said be aware that Matt sells West Systems, a good thing. A good product, 
but there are alternatives, my point.
My apologies again for making an error, i hope I have made up for it by giving 
some good information and some alternatives and other resources.
john Derstine 
Aerospace Composite web site:
http://www.acp-composites.com/acp-ez.htm

Received: Thu, 2 Nov 2000 09:25:05 -0800  
From:  "Matt Gewain" <[EMAIL PROTECTED]> 
To:  'John Derstine' <[EMAIL PROTECTED]>, 'RCSE' <[EMAIL PROTECTED]> 
CC:   
Subject:  RE: [RCSE] Micro balloons? 
MIME Ver:  1.0

 
I checked with Gougeon the manufacturers of Microlight and it is not a 
mixture of these two fillers.
 
Microlight is a thermal plastic hollow micro sphere, similar to micro 
balloons only they use a lighter material to make the hollow micro spheres. 
Because it is a thermal plastic you should not use any resin system on it 
that you would not use on the foam core of your wing, it will melt just like 
you foam core. Most model builders tell me that a 2 oz container is more 
than they will use in many years, if you want a larger quantity there is a 
substantial savings for large containers.
 
You can order West Systems Microlight by calling us at 1-800-338-1278
 
Matt Gewain 
Composite Structures Technology 
www.cstsales.com


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to