I would guess fumed silica(Cabosil, Aerosil), or a mix of this and micro
spheres. But this only a guess, as there are So many possibilities.
What is important is that the more stuff you add to an epoxy mix, the less
epoxy there is, IE less stickum. I have found Fumed silica to add the least
bulk as an additive while giving thixotropic properties (no sag). For
additional structural properties chopped glass or carbon fibers makes an
excellent hardware bonding or structural glue (in addition to a little
silica to keep it from sagging if neccessary).
For light weight and good sanding, hollow spheres by any name fill the bill.
Fumed silica is dangerous to breath, so use a resperator when mixing it.
True for all epoxy operations really.
I am no expert, these are just my personal opinions based on experience.

FibreGlast website, another good supplier, for East coast guys:
http://www.fibreglast.com/
Comprehensive list of resources: http://www.advmat.com/links.html

 John Derstine
E-mail; [EMAIL PROTECTED]
Scale Soaring: http://www.Geocities.com/~scalesoar

-----Original Message-----
From: Larry Scaramella [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 03, 2000 8:01 AM
To: John Derstine
Subject: Re: [RCSE] Micro balloons?


Hi John,

Do you know what the white epoxy like stuff is that you find on the molded
planes it looks like micro B but it is more structural or tough.

Larry


RCSE-List facilities provided by Model Airplane News.  Send "subscribe" and 
"unsubscribe" requests to [EMAIL PROTECTED]

Reply via email to