Hi Bob, nice to meet you too.
I checked what you posted in SR40. No it is not the same note. The article is composed of two pages and it gives interesting info. some months ago I wrote a note as a message regarding IF monitoring with SR in the SR40 group, suggesting where to attach the Softrock SDR to monitor IF ... at NB input, after 2nd mixer avoiding the 2nd IF filters. That is what our friends reported. I will try to ask RSGB if I cn post that article on SDR newsgroup. I can do that for my notes, reporting copyright RadCom / RSGB, but I do not remember if they gave me the OK for others authors articles. You should join RSGB as an overseas member ... there are very interesting articles and the golden part is Technical Topics run by our glorious Pat Hawker, G3VA ... thanks to him RSGB has my continuous membership since end of 1965 .... hi 73 Gian I7SWX --- In [email protected], "rhblumeng" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "Giancarlo" <i7swx@> wrote: > > > > > Hi all, > > > > RSGB Memebers have received RadCom January 2007 issue. At pages 53-54 > > there is an article "Add-on bandscope" by VK6VZ & VK6APH. They report > > on a modification to aYaesu FT1000D to allow connection of a SoftRock > > V6 to perform bandscope. > > I believe this extract can be posted in the Files directory > > mentioning the origin and publication. As both the authors are > > visiting, sometimes, this group they may confirm we can publish it or > > not. I have a pdf copy made. > > > > 73 > > > > Gian > > I7SWX > > > Hi Gian - > > What I was quoting from was an article in the files of the Softrock > group written by VK6VZ, so it may be similar information. It is > located in the files section, V6 folder, IF application folder, if you > might wish to compare it to the Radcom article. I wish Radcom was > more easily found in the US. > > Nice to meet you, Bob >
