On a related front: Anyone know how to have a "normal" console on the first head at the same time as mgatv on the second?
On Sat, 2006-09-09 at 21:27 +0100, Alasdair Campbell wrote: > On 09/09/06, Marko Mäkelä <[EMAIL PROTECTED]> wrote: > > The first time I tested with your configuration, I got a picture. > > "top" indicated 60% CPU usage, which is slightly more than with > > mgatv. So, I tried to switch from YUY2 to I420. The CPU load > > would drop to around 40%, but the video overlay would be all black. > > Switching back to YUY2 did affect CPU usage, but the video overlay > > remained black. Even rebooting did not help. > > Well when I was fiddling with different modes in softdevice using -vo > dfb:, I noticed that if I changed away from YUY2, the 2nd head went > blank, and the video appeared on the 1st head with the wrong colours. > After changing back to YUY2 I had to reset the STRETCH BLIT option > just below. It has to be ON for me to see an image. The OSD works > throughout this. > > don't know why rebooting didn't help though... > > > In the log, I can see messages like this: > > > > [dfb] (re)configuring Videolayer to 720 x 576 (720x576) > > [dfb]: SetParams: failed to set buffermode to back video, reverting to > > normal > > [dfb] SetParams: > > action=IDirectFBDisplayLayer::SetConfiguration(DFBDisplayLayerConfig&), > > result=Not supported! > > Can't configure ScreenLocation. Hope it is Fullscreen > > [surface capabilities] videoSurface: videoonly PixelFormat = 0x00200801 > > [dfb] (re)configured 0x00200806 > > > > Any ideas? -vo dfb:mgatv works fine. > > > > Marko > > _______________________________________________ > > Softdevice-devel mailing list > > [EMAIL PROTECTED] > > https://lists.berlios.de/mailman/listinfo/softdevice-devel > > > > _______________________________________________ Softdevice-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/softdevice-devel
