On Mon, Sep 11, 2006 at 10:48:43AM +0300, Marko Mäkelä wrote:
> I think I know. I'll try to post my directfbrcs tonight. I have
> two of them: one for VGA output on primary head, and another one for
> -vo dfb:mgatv on the secondary head. Both allow the console to be used
> on the primary head. I'm using the secondary head only.
>
> Since the console shares the OSD layer of the primary head, the usability
> of the primary-head-only setup is a bit limited. (Also, light grey tiny
> text on a bright TV background is often hard to read.)
Attached: directfbrc.vga and directfbrc.mgatv. I use to symlink either
file to /etc/directfbrc. Remember to pass -vo dfb or -vo dfb:mgatv
to softdevice.
I believe that DirectFB will pick the first entry from /etc/fb.modes
that matches the specified resolution. In my case, it'd be 768x576-75
(46.58 kHz and 75 Hz) when I'm using a SVGA monitor.
Marko
fbdev=/dev/fb0
mode=768x576
no-banner
no-debug
no-vt
matrox-crtc2
matrox-tv-standard=pal
matrox-cable-type=scart-rgb
primary-layer=2
hardware
mmx
no-banner
no-vt
_______________________________________________
Softdevice-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/softdevice-devel
