On Saturday 03 March 2007 16:03, Hugo Visser wrote: > > > > Can't believe what I see. > > > > Can you try attached patch to get some more infos ? > > Which graphic card do you use ? > > I'm running vdr on an epia m10k, so the graphics are unichrome/ > cle266. I'm using the -vo dfb:cle266 switch, but it doesn't matter if > I'm using dfb: or dfb:266.
Good to know. So I should try my epia. > > Here's the log (latest cvs + patch) > > Then I set the cropmode to 16:9 > > Mar 3 15:49:35 localhost vdr: [7806] [video] ++ afd = 1.33333, pasp = > 1.33333, dasp = 1.33333, sa = 3, dw = 1024, dh = 768 > Mar 3 15:49:35 localhost vdr: [7806] [VideoOut]: 528x576 [0,0 528x576] -> > 1024x768 [128,0 768x768] > Mar 3 15:49:35 localhost vdr: [7806] [dfb] (re)configuring Videolayer to > 528 x 576 (528x576) > Mar 3 15:49:35 localhost vdr: [7806] [dfb] surface capabilities for > (videoSurface): videoonly, double-buffered, flipping, PixelFormat = > 0x08100609 > Mar 3 15:49:35 localhost vdr: [7806] [dfb] (re)configured 0x08100609 > Mar 3 15:49:36 localhost vdr: [7806] [video] -- afd = 1.77778, pasp = > 1.33333, dasp = 1.33333, sa = 3, dw = 1024, dh = 768 > Mar 3 15:49:36 localhost vdr: [7806] [VideoOut]: 528x576 [0,72 528x432] -> > 1024x768 [0,0 1024x768] But this are the correct numbers to fill the entire screen. 528x576 [0,72 528x432]: From source there are 72 lines cut from top and 72 lines cut from bottom. 1024x768 [0,0 1024x768]: Whole screen is used (x, y offset are zero). Short test on epia: numer are the nearly the same, but screen is not filled :-(( . -- Stefan Lucke _______________________________________________ Softdevice-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/softdevice-devel
