Or for those who don't count easily in binary (that would be me): 0 1.846 0000 1 1.892 0001 2 3.546 0010 3 3.846 0011 4 7.046 0100 5 7.221 0101 6 10.146 0110 7 14.046 0111 8 14.271 1000 9 18.114 1001 10 21.046 1010 11 21.321 1011 12 24.936 1100 13 28.046 1101 14 28.092 1110 15 28.346 1111
73, Pete At 03:25 AM 6/5/2008, Tony Parks wrote: >Hi Dick, > >The v2.4 should give the following center frequencies for switch inputs >0000 to 1111: > > 0 > 1.846 > > 1 > 1.892 > > 2 > 3.546 > > 3 > 3.846 > > 4 > 7.046 > > 5 > 7.221 > > 6 > 10.146 > > 7 > 14.046 > > 8 > 14.271 > > 9 > 18.114 > > 10 > 21.046 > > 11 > 21.321 > > 12 > 24.936 > > 13 > 28.046 > > 14 > 28.092 > > 15 > 28.346 > >73, >Tony KB9YIG > >----- Original Message ----- >From: <mailto:[EMAIL PROTECTED]>dick_faust >To: <mailto:[email protected]>[email protected] >Sent: Wednesday, June 04, 2008 11:06 PM >Subject: [softrock40] Xtall Software V2.4 - SI570 Registers? > >Tony is shipping Ver 2.4 with kits. I thought there was some >documentation on where to find the memory locations for start up and >the 16 programmed freqs, which are now all different from the default >startup. There only appears to be some info on v2.1 and v2.5 in the >files area. > >Can any one provide the memory locations? > >Noticed that Sparkfun has been out of programmers for some time and >found another source at same price. ><http://microcontrollershop.com/>http://microcontrollershop.com/ >Their part # PIC-PG2 ><http://microcontrollershop.com/product_info.php?>http://microcontrollershop.com/product_info.php? >cPath=112_97&products_id=1841&osCsid=e25df0ab34ff32f014bd1e7a716aabe5 >[Sometimes the Yahoo editor breaks the long lines in the link, never >know untill I post] > >73, Dick K9IVB > >
