Tom,
Thanks for the clearifications.
> Location 0 in the eeprom is the 6 registers that are read from the
Si570
> Location 6 in the eeprom is the 6 registers for switch setting 0000.
> Location C hex is the 6 registers for switch setting 0001 and so on.
>
Does the last location [switch setting #15 {1111}] start at 0x60 ? Just
a check on my math.
Is there a place to change the I2C address ?
I will still make a spreadsheet for the memory map for v2.4 so each
location is clear. Could make one for v2.4+ too if it is just a shift
of 6 places.
Thanks,
73, Dick K9IVB
