>>In a message dated 4/3/04 7:03:04 PM Mountain Standard Time, [EMAIL PROTECTED] >>writes: >>The 3rd bearing, the one on the Disc side, the >>outer, inner race seal chewed. The last one in no better shape. >>Rear Wheel Bearings were replaced due to similar failure 3000 miles, (5000 >>Km) ago.
>Is the spacer between the final drive flange and the hub in there? Clymer >calls it the rear axle sleeve. >Greg --------------------------------------------- >The rear axle sleeve is in there. >See picture here: http://bikerbob12.tripod.com >OK, I checked the picture. The part at the top of the picture is what Clymer >refers to as a "rear axle distance collar", (at least in my old book printed >in 1976.) The "rear axle sleeve" is a different part, and isn't in your >picture. >I just wanted to be sure we are talking about the same part. The picture >isn't clear enough to read the print on the exploded drawing. >Regards, >Greg >'75 CB750F It is present on the bike but not in the picture. See updated picture: http://bikerbob12.tripod.com Regards, Bob Ward SOHC/4 #1578 CB750F 75 ( Mod. Wheels of CB750F2 77
