RE: [SonicWALL]- Problem forwarding packets

[Jesper Bach]

Title: Message

Lance,   If you are using GroupVPN your setup will not work due to a bug in the 6.3.1.4 firmware (the error goes way back to v.6.2.x.x). Reaching remote networks is only possible when the remote sites initiates traffic, not when your VPN client does.   You must use the "Advanced VPN Client setup"  where you create aa SA for your VPN client to connect to. Doing this in combination with setting an internal IP address in the VPN client and checking "Forward packets to remote VPNs) will work.   /jesper -----Original Message----- From: Lance Loudan @ Benedict [mailto:[EMAIL PROTECTED]] Sent: 16. december 2002 20:54 To: SonicWall User Forum (E-mail) Subject: [SonicWALL]- Problem forwarding packets I have set up my VPN client as set forth in the advance instructions supplied from Sonicwall.  I have that working fine and can connect to the firewall, my problem is that it is not forwarding to remote VPNs.  Do I need to setup a client for each new subnet and route it through the same firewall.  I guess my question is what tells the firewall to route the packets.  I have checked the route table and the remote VPN are not listed in it but I have SAs setup for all of them.  Do I still need to add them to the routing table?  The routes that I did add to the routing table are still not working either.  I could use some help please.   Lance L