Uh, older Megaminxes might look slightly different inside. The most important part of the whole puzzle, just like for the 3x3 is of course... what would you say?... I'd say the screws. And I have two six-color Megaminxes that have short screws with small heads which are inside that cylindrical hole. So they can't block the center cubie and define how far you can pull it from the kernel. Not good, since then the limit is defined by a fully compressed spring. Not good at all, as I learned the hard way. Do you know how your screws look like?
Cheers! Stefan --- In [email protected], christopher_pelley <[EMAIL PROTECTED]> wrote: > > I'd definitely be interested in a few kits if you end up doing > that. I have a Meffert's Megaminx from several years ago that I > just recently unpackaged, and it's way too loose. So I've been > meaning to get around to tuning it. Plus I wouldn't mind > retrofitting some of my 3x3x3's with better springs/washers. > > Chris > > > --- In [email protected], "Stefan Pochmann" > <pochmann@> wrote: > > > > I got mine here: > > http://www.federnshop.com/ > > > > I bought a few hundred cause they become *a lot* cheaper then. I'm > > running out but I'm gonna buy more again soon, then I could also > offer > > little kits for reasonable prices if someone is interested, for > > example for the meffert megaminx and rubik's studio 3x3. > > > > Cheers! > > Stefan > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
