Okay, you've inspired me to take it apart. The one face is so loose I can literally just grab a corner and pull it out. I see now why it's so loose. You know those two opposite posts on the spindle that have cylindrical posts? That would be the top one in this photo:
http://tinyurl.com/bvruk Well, it's not screwed all the way in, evidently. I can pull that center out very far compared to all the others: http://tinyurl.com/7p887 The opposite face with the other cylindrical post barely pulls out at all. So I assume those two faces should be balanced better on the screw depth. The other ten centers that protrude from the rectangular posts seem fine-- about 1mm or so. Now I'm off to get the pocket knife... By the way, does your paper insert method work for keeping Megaminx center caps on? Chris --- In [email protected], "Stefan Pochmann" <[EMAIL PROTECTED]> wrote: > > No, I think the plastic pieces all look the same (well, that Tomy > Megaminx has "shorter" corners, but my 6-color later Meffert's don't). > But let me tell you in my experience the caps of the Megaminxes are > most often not glued nearly as hard as for example the studio 3x3. > Just take a thin blade and apply little force, maybe try several > centers to find an easy one. Good luck! > > Cheers! > Stefan Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
