I forgot to post a photo of the screw: http://tinyurl.com/7q2so
After tightening, the center did not pull out as far. So presumably this would benefit from one of your proposed spring/washer kits? Chris > > --- In [email protected], "Stefan Pochmann" > > <pochmann@> wrote: > > > > > > Uh, older Megaminxes might look slightly different inside. The > > most > > > important part of the whole puzzle, just like for the 3x3 is of > > > course... what would you say?... I'd say the screws. And I have > > two > > > six-color Megaminxes that have short screws with small heads which > > are > > > inside that cylindrical hole. So they can't block the center cubie > > and > > > define how far you can pull it from the kernel. Not good, since > > then > > > the limit is defined by a fully compressed spring. Not good at > > all, as > > > I learned the hard way. Do you know how your screws look like? > > > > > > Cheers! > > > Stefan Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
