Here are some photos: New center cap, corner, and corner cap: http://tinyurl.com/csvvh
New corner close-up: http://tinyurl.com/a7eae Chris --- In [email protected], christopher_pelley <[EMAIL PROTECTED]> wrote: > > Well I got a look at the new 2006 DIY cube. Craig is right-- these do > seem to be all-new manufacture. The corner cap gap is less than 1mm, > a little smaller than I imagined. Also the arched centers are no > longer grafted on to flat centers (look closely at the 2005 centers). > Instead it all seems to be one molded piece. Regarding the edges > catching on the centers-- I did also experience that, but only when > the caps were still off. Finally, one other difference is the > manufacturing code is absent (i.e. M1005B imprinted on one corner cap). Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
