Well I got a look at the new 2006 DIY cube. Craig is right-- these do seem to be all-new manufacture. The corner cap gap is less than 1mm, a little smaller than I imagined. Also the arched centers are no longer grafted on to flat centers (look closely at the 2005 centers). Instead it all seems to be one molded piece. Regarding the edges catching on the centers-- I did also experience that, but only when the caps were still off. Finally, one other difference is the manufacturing code is absent (i.e. M1005B imprinted on one corner cap).
BTW, the white DIY arched centers exist: http://tinyurl.com/84sdz Hope they start selling the kits again soon. Chris --- In [email protected], "Craig Bouchard" <[EMAIL PROTECTED]> wrote: > > I'll try to address everyone: > > Thank you all for the congratulations... > > To Chris: I think I've found a fault with the DIYs...The edges are > bigger than the center pieces (you know how there is an opening on the > one side of the edge) well that can slide over the center, which I > have found can cause pops, and send center caps across the room...But > I still love it :) Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
