Apart from some problems I had when I first installed under Mandrake, it's
always worked from boot (assuming BT are working ...).

All the best,
Tim.

----- Original Message -----
From: "Martin West" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 07, 2001 11:16 AM
Subject: [speedtouch] Re: Help with Mandrake 8.2


>
> In the end I reinstalled mdk 8.1, initially w/o the speedtouch modem,
> installed the latest draktools, then ran draknet. Initially the results
were
> disappointing, so I went off to watch the eufa cup match between leeds and
> grasshoppers. Came back and pppd started up successfully this time. It may
> be a problem starting the pppd at boot time.
> Thanks for the help
> ----- Original Message -----
> From: "Tim Brody" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, December 06, 2001 10:43 AM
> Subject: [speedtouch] Re: Help with Mandrake 8.2
>
>
> >
> > Mandrake 8.2? Latest version is 8.1?
> >
> > It would appear to me that you've installed the Alcatel modem management
> > software, but are trying to use the user-space driver with it (i.e. the
> one
> > this list is related to) - naturally this won't work very well!
> >
> > Fortunately the alcatel mgmt driver does support uninstall, if I recall
> its
> > something like "make uninstall" from the directory where you unpacked
the
> > management tool, which will rip out its hotplugging script.
> >
> > In order to use the modem under Mandrake you need to download and untar
> the
> > Alcatel management software, COPY mgmt.o to /usr/share/speedtouch/,
update
> > /usr/share/speedtouch/speedtouch.sh appropriately and run the draknet
> > wizard.
> >
> > All the best,
> > Tim.
> >
> > ----- Original Message -----
> > From: "Martin West" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Wednesday, December 05, 2001 6:26 PM
> > Subject: [speedtouch] Help with Mandrake 8.2
> >
> >
> > >
> > > I installed Mandrake 8.2 download, specifying the speedtouch adsl
modem.
> > peers/adsl at the end.
> > >
> > > The system is partially working in that the device is recognised when
> > hotplugged, except there is a not claimed message, not sure if this is
> > significant ...
> > > Dec 5 15:03:46 mandrake1 kernel: hub.c: USB new device connect on
> bus1/2,
> > assigned device number 3
> > >
> > > Dec 5 15:03:46 mandrake1 kernel: usb.c: USB device 3 (vend/prod
> > 0x6b9/0x4061) is not claimed by any active driver.
> > >
> > > Dec 5 15:03:47 mandrake1 Speedmgmt[2614]: Alcatel SpeedTouch USB
> > Management daemon started.
> > >
> > > Dec 5 15:03:47 mandrake1 Speedmgmt[2614]: (C) Alcatel 2001, Version
> 1.3.4
> > >
> > > Dec 5 15:03:47 mandrake1 kernel: usb_control/bulk_msg: timeout
> > >
> > > Dec 5 15:03:47 mandrake1 kernel: usbdevfs: USBDEVFS_BULK failed dev 3
ep
> > 0x85 len 512 ret -110
> > >
> > > Dec 5 15:03:47 mandrake1 Speedmgmt[2614]: Preceding (timeout) error
> > messages are normal.
> > >
> > > but when I start pppd call adsl I get ...
> > >
> > > Dec 5 15:15:36 mandrake1 kernel: CSLIP: code copyright 1989 Regents of
> the
> > University of California
> > >
> > > Dec 5 15:15:37 mandrake1 kernel: PPP generic driver version 2.4.1
> > >
> > > Dec 5 15:15:37 mandrake1 pppd[2686]: pppd 2.4.1 started by root, uid 0
> > >
> > > Dec 5 15:15:37 mandrake1 kernel: HDLC line discipline: version 3.2,
> > maxframe=4096
> > >
> > > Dec 5 15:15:37 mandrake1 kernel: N_HDLC line discipline registered.
> > >
> > > Dec 5 15:15:37 mandrake1 pppd[2686]: Using interface ppp0
> > >
> > > Dec 5 15:15:37 mandrake1 pppd[2686]: Connect: ppp0 <--> /dev/pts/5
> > >
> > > Dec 5 15:15:38 mandrake1 pppd[2686]: Modem hangup
> > >
> > > Dec 5 15:15:38 mandrake1 pppd[2686]: Connection terminated.
> > >
> > > Dec 5 15:15:38 mandrake1 pppd[2686]: Using interface ppp0
> > >
> > > Dec 5 15:15:38 mandrake1 pppd[2686]: Connect: ppp0 <--> /dev/pts/5
> > >
> > > Dec 5 15:15:39 mandrake1 pppd[2686]: Modem hangup
> > >
> > > peers/adsl
> > >
> > > noauth
> > >
> > > noipdefault
> > >
> > > pty "/usr/bin/pppoa2 -vpi 0 -vci 38"
> > >
> > > sync
> > >
> > > kdebug 1
> > >
> > > noaccomp
> > >
> > > nopcomp
> > >
> > > noccp
> > >
> > > novj
> > >
> > > holdoff 4
> > >
> > > maxfail 25
> > >
> > > persist
> > >
> > > usepeerdns
> > >
> > > defaultroute
> > >
> > > user [EMAIL PROTECTED]
> > >
> > >
> > >
> > > Thanks Martin West
> > >
> > > PS I did download the latest drakxtool and tried reconfiguring. It
said
> > everything was installed.
> > >
> > > PPS I also have an ethernet card installed.
> > >
> > >
> > > Liste de diffusion modem ALCATEL SpeedTouch USB
> > > Pour se d�sinscrire :
> > mailto:[EMAIL PROTECTED]?subject=unsubscribe
> > >
> > >
> >
> >
> >
> > Liste de diffusion modem ALCATEL SpeedTouch USB
> > Pour se d�sinscrire :
> mailto:[EMAIL PROTECTED]?subject=unsubscribe
> >
> >
> >
> >
>
>
>
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire :
mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>



Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to