Hello,
Followed the HowTo but got stucked @ the end. No connection available yet:o/ Have got Mdk 8.0 - Kernel 2.4.3 - pppd 2.4.0. Summary: 1. Had got 'SpeedTouch-1_0' Driver & config completed, following precisely the HowTo, not a single 'error' message. But still no connection available. 2. Synchronising with LinuxConf. it says : "the state of the syst isn't in sync with the current/updated config ... Here is the command to execute: Changing permission of file /usr/sbin/pppd from 105755 to 104755 Service usbd isn't running Executing: /etc/rc5.d/S02usbd start The following command told me sthg has to be done /etc/rc5.d/S14nflock probe Executing: /etc/rc5.d/S14nflock restart " OK "do it". Then after retyping the connexion commands sequence, that's : '# /usr/local/bin/modem_run -m -f (towards)mgm.o)' the 2 ST's lights got blinking for a while (green & orange) then stay green again : not connected :o/ Please any help welcome :o) kozaki PS Happy New Year with the tux mascotte ! R�sum� : 1. Installation drivers (speedtouch-1_0) et config r�alis�. Mais �chec (pas de connexion) lors de la commande 'modem_run...' puis 'pppd call adsl' 2. En quitant LinuxConf je lis (�cran "Status of the system) : "the state of the syst isn't in sync with the current/updated config ... Here is the command to execute: Changing permission of file /usr/sbin/pppd from 105755 to 104755 Service usbd isn't running Executing: /etc/rc5.d/S02usbd start The following command told me sthg has to be done /etc/rc5.d/S14nflock probe Executing: /etc/rc5.d/S14nflock restart " Bon, je "do it". Et retape la s�quence de commandes de connexion du SpeedTouch (suivant les commandes du HowTo de Benoit : # /usr/local/bin/modem_run -m -f (chemin vers)mgm.o). L�, les 2 diodes clignotent un bon coup, vert, orange (cas non document� jusqu'ici), et puis restent vert fixe. Dc, not connected :o/ Tout conseil particuli�rement bienvenu :o) kozaki Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
