Sorry, you also need to see the syslog output when pppd is run.
Alex. On Thu, 2002-01-03 at 04:10, kozaki wrote: > > Hello, > > Thanks to Alex. > Following is the 'syslog' at the time i tried to complete connection with SP > adsl (yesterday evening). Seems smthg works with usb-uhci :o) > Unfortunetly i'm far to understand the details -even staring at it all night > long. Please would u give me a help ? > ps I kept the details below, if needed. > > FRANCAIS. Je regarde /var/log/syslog, � la date et l'heure o� j'ai tent� > connecter l'adsl > > "Jan 1 22:20:57 localhost kernel: usb.c: registered new driver usbdevfs > Jan 1 22:20:57 localhost kernel: usb.c: registered new driver hub > Jan 1 22:20:57 localhost kernel: usb-uhci.c: $Revision: 1.251 $ time > 23:13:16 Apr 15 2001 > Jan 1 22:20:57 localhost kernel: usb-uhci.c: High bandwidth mode enabled > Jan 1 22:20:57 localhost kernel: PCI: Found IRQ 5 for device 00:07.2 > Jan 1 22:20:57 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 > Jan 1 22:20:57 localhost kernel: usb-uhci.c: Detected 2 ports > Jan 1 22:20:57 localhost kernel: usb.c: new USB bus registered, assigned bus > number 1 > Jan 1 22:20:57 localhost kernel: hub.c: USB hub found > Jan 1 22:20:57 localhost kernel: hub.c: 2 ports detected > Jan 1 22:20:57 localhost kernel: hub.c: USB new device connect on bus1/1, > assigned device number 2 > Jan 1 22:20:57 localhost kernel: usb.c: USB device 2 (vend/prod > 0x6b9/0x4061) is not claimed by any active driver. > Jan 1 22:20:57 localhost kernel: ip_tables: (c)2000 ..." > > usbdevfs & usb hub drivers are there :o). Does it says anything more to help > ?? > Many thanks to you, > kozaki > ---------------------- > Le Mardi 1 Janvier 2002 18:38, Alex a �crit : > > It sounds as though modem_run was ok (if you got steady activated > > lights). If pppd isn't working its worth looking at syslog to see why > > your pppd is not connecting. > > > > Alex. > >------------------------ > > On Wed, 2002-01-02 at 04:32, kozaki wrote: > > > Hello, > > > > > > Followed the HowTo but got stucked @ the end. No connection available > > > yet:o/ Have got Mdk 8.0 - Kernel 2.4.3 - pppd 2.4.0. > > > > > > Summary: > > > > > > 1. Had got 'SpeedTouch-1_0' Driver & config completed, following > > > precisely the HowTo, not a single 'error' message. > > > But still no connection available. > > > > > > 2. Synchronising with LinuxConf. > > > it says : "the state of the syst isn't in sync with the current/updated > > > config ... Here is the command to execute: > > > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > > > Service usbd isn't running > > > Executing: /etc/rc5.d/S02usbd start > > > The following command told me sthg has to be done > > > /etc/rc5.d/S14nflock probe > > > Executing: /etc/rc5.d/S14nflock restart " > > > OK "do it". > > > Then after retyping the connexion commands sequence, > > > that's : '# /usr/local/bin/modem_run -m -f (towards)mgm.o)' > > > the 2 ST's lights got blinking for a while (green & orange) then stay > > > green again : not connected :o/ > > > > > > Please any help welcome :o) > > > kozaki > > > > > > PS Happy New Year with the tux mascotte ! > > > > > > R�sum� : > > > 1. Installation drivers (speedtouch-1_0) et config r�alis�. > > > Mais �chec (pas de connexion) lors de la commande 'modem_run...' puis > > > 'pppd call adsl' > > > > > > 2. En quitant LinuxConf je lis (�cran "Status of the system) : > > > "the state of the syst isn't in sync with the current/updated config ... > > > Here is the command to execute: > > > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > > > Service usbd isn't running > > > Executing: /etc/rc5.d/S02usbd start > > > The following command told me sthg has to be done > > > /etc/rc5.d/S14nflock probe > > > Executing: /etc/rc5.d/S14nflock restart " > > > > > > Bon, je "do it". > > > Et retape la s�quence de commandes de connexion du SpeedTouch (suivant > > > les commandes du HowTo de Benoit : > > > # /usr/local/bin/modem_run -m -f (chemin vers)mgm.o). > > > L�, les 2 diodes clignotent un bon coup, vert, orange (cas non document� > > > jusqu'ici), et puis restent vert fixe. Dc, not connected :o/ > > > > > > Tout conseil particuli�rement bienvenu :o) > > > > > > kozaki > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > Pour se d�sinscrire : > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se d�sinscrire : > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
