Le Mercredi 2 Janvier 2002 17:20, vous avez �crit : > Sorry, you also need to see the syslog output when pppd is run. > > Alex.
OK! Below's the syslog outpout when pppd is running. i do apologize for sending useless syslog output yesterday ; tough to help newbie=8-O, i guess. i went to '/etc/ppp/peers/adsl' where i could fix my login !o) '../peers/adsl' is actually configured for pppoa3, and has got' #icp-echo-(smthg)' lines i couldn't find within the 'adsl' file in 'speedtouch-1_0' doc. syslog report : "Jan 3 16:52:49 localhost kernel: PPP generic driver version 2.4.1 Jan 3 16:52:49 localhost pppd[1674]: pppd 2.4.0 started by root, uid 0 Jan 3 16:52:49 localhost pppoa3[1675]: PPPoA3 version 1_0 started by root (uid 0) Jan 3 16:52:49 localhost pppoa3[1675]: Control thread ready Jan 3 16:52:49 localhost pppd[1674]: using channel 1 Jan 3 16:52:49 localhost pppd[1674]: Using interface ppp0 Jan 3 16:52:49 localhost pppd[1674]: Connect: ppp0 <--> /dev/pts/5 Jan 3 16:52:49 localhost kernel: HDLC line discipline: version 3.2, maxframe=4096 Jan 3 16:52:49 localhost kernel: N_HDLC line discipline registered. Jan 3 16:52:49 localhost pppoa3[1681]: modem --> pppoa3 --> ppp(d) stream ready Jan 3 16:52:49 localhost pppoa3[1680]: ppp(d) --> pppoa3 --> modem stream ready Jan 3 16:52:50 localhost pppd[1674]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xb6584298>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP ConfReq id=0x55 <mru 1500> <auth chap MD5> <magic 0x4b3790a>] Jan 3 16:52:50 localhost pppd[1674]: sent [LCP ConfRej id=0x55 <auth chap MD5>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP ConfRej id=0x1 <asyncmap 0x0>] Jan 3 16:52:50 localhost pppd[1674]: sent [LCP ConfReq id=0x2 <magic 0xb6584298>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP ConfReq id=0x56 <mru 1500> <auth pap> <magic 0x4b3790a>] Jan 3 16:52:50 localhost pppd[1674]: sent [LCP ConfRej id=0x56 <auth pap>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP ConfAck id=0x2 <magic 0xb6584298>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP ConfReq id=0x57 <mru 1500> <magic 0x4b3790a>] Jan 3 16:52:50 localhost pppd[1674]: sent [LCP ConfAck id=0x57 <mru 1500> <magic 0x4b3790a>] Jan 3 16:52:50 localhost pppd[1674]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP TermReq id=0x58] Jan 3 16:52:50 localhost pppd[1674]: LCP terminated by peer Jan 3 16:52:50 localhost pppd[1674]: sent [LCP TermAck id=0x58] Jan 3 16:52:50 localhost kernel: usbdevfs: async_completed: status 0 errcount 0 actlen 53 pipe 0xc0038280 Jan 3 16:52:50 localhost pppd[1674]: rcvd [LCP TermReq id=0xff] Jan 3 16:52:50 localhost pppd[1674]: sent [LCP TermAck id=0xff] Jan 3 16:52:53 localhost pppd[1674]: Connection terminated. --- Jan 3 16:52:53 localhost pppd[1674]: using channel 2 Jan 3 16:52:53 localhost pppoa3[1683]: PPPoA3 version 1_0 started by root (uid 0) Jan 3 16:52:53 localhost pppd[1674]: Using interface ppp0 Jan 3 16:52:53 localhost pppd[1674]: Connect: ppp0 <--> /dev/pts/6 Jan 3 16:52:53 localhost pppd[1674]: sent [LCP ConfReq id=0x3 <asyncmap 0x0> <magic 0xff17be8d>] Jan 3 16:52:53 localhost pppoa3[1683]: A previous instance seems to be running ...Jan 3 16:52:53 localhost pppoa3[1675]: Write to ppp Canceled Jan 3 16:53:03 localhost pppd[1674]: using channel 3 ...Jan 3 16:53:03 localhost pppd[1674]: Connect: ppp0 <--> /dev/pts/5" ... [& so for until :] Jan 3 16:56:28 localhost pppd[1674]: using channel 25" PS : While reinstalling the Alcatel driver (not that Wanadoo @*! soft) in Window$, i had messages such as "lack '*.vxd' ". Wanadoo hotline told me to put back a former Registry backup, which advice i, foolish, followed : Windub can't start anymore !-(). Well that's funny... > > Le Mardi 1 Janvier 2002 18:38, Alex a �crit : > > > It sounds as though modem_run was ok (if you got steady activated > > > lights). If pppd isn't working its worth looking at syslog to see why > > > your pppd is not connecting. > > > > > > Alex. > > > > > > On Wed, 2002-01-02 at 04:32, kozaki wrote: > > > > Hello, > > > > > > > > Followed the HowTo but got stucked @ the end. No connection available > > > > yet:o/ Have got Mdk 8.0 - Kernel 2.4.3 - pppd 2.4.0. > > > > > > > > Summary: > > > > > > > > 1. Had got 'SpeedTouch-1_0' Driver & config completed, following > > > > precisely the HowTo, not a single 'error' message. > > > > But still no connection available. > > > > > > > > 2. Synchronising with LinuxConf. > > > > it says : "the state of the syst isn't in sync with the > > > > current/updated config ... Here is the command to execute: > > > > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > > > > Service usbd isn't running > > > > Executing: /etc/rc5.d/S02usbd start > > > > The following command told me sthg has to be done > > > > /etc/rc5.d/S14nflock probe > > > > Executing: /etc/rc5.d/S14nflock restart " > > > > OK "do it". > > > > Then after retyping the connexion commands sequence, > > > > that's : '# /usr/local/bin/modem_run -m -f (towards)mgm.o)' > > > > the 2 ST's lights got blinking for a while (green & orange) then stay > > > > green again : not connected :o/ > > > > > > > > Please any help welcome :o) > > > > kozaki > > > > > > > > PS Happy New Year with the tux mascotte ! > > > > > > > > R�sum� : > > > > 1. Installation drivers (speedtouch-1_0) et config r�alis�. > > > > Mais �chec (pas de connexion) lors de la commande 'modem_run...' puis > > > > 'pppd call adsl' > > > > > > > > 2. En quitant LinuxConf je lis (�cran "Status of the system) : > > > > "the state of the syst isn't in sync with the current/updated config > > > > ... Here is the command to execute: > > > > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > > > > Service usbd isn't running > > > > Executing: /etc/rc5.d/S02usbd start > > > > The following command told me sthg has to be done > > > > /etc/rc5.d/S14nflock probe > > > > Executing: /etc/rc5.d/S14nflock restart " > > > > > > > > Bon, je "do it". > > > > Et retape la s�quence de commandes de connexion du SpeedTouch > > > > (suivant les commandes du HowTo de Benoit : > > > > # /usr/local/bin/modem_run -m -f (chemin vers)mgm.o). > > > > L�, les 2 diodes clignotent un bon coup, vert, orange (cas non > > > > document� jusqu'ici), et puis restent vert fixe. Dc, not connected > > > > :o/ > > > > > > > > Tout conseil particuli�rement bienvenu :o) > > > > > > > > kozaki > > > > > > > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > > Pour se d�sinscrire : > > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > > Pour se d�sinscrire : > > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > > Pour se d�sinscrire : > > mailto:[EMAIL PROTECTED]?subject=unsubscribe > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : > mailto:[EMAIL PROTECTED]?subject=unsubscribe Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
