It sounds as though modem_run was ok (if you got steady activated lights). If pppd isn't working its worth looking at syslog to see why your pppd is not connecting.
Alex. On Wed, 2002-01-02 at 04:32, kozaki wrote: > > Hello, > > Followed the HowTo but got stucked @ the end. No connection available yet:o/ > Have got Mdk 8.0 - Kernel 2.4.3 - pppd 2.4.0. > > Summary: > > 1. Had got 'SpeedTouch-1_0' Driver & config completed, following precisely > the HowTo, not a single 'error' message. > But still no connection available. > > 2. Synchronising with LinuxConf. > it says : "the state of the syst isn't in sync with the current/updated > config ... Here is the command to execute: > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > Service usbd isn't running > Executing: /etc/rc5.d/S02usbd start > The following command told me sthg has to be done > /etc/rc5.d/S14nflock probe > Executing: /etc/rc5.d/S14nflock restart " > OK "do it". > Then after retyping the connexion commands sequence, > that's : '# /usr/local/bin/modem_run -m -f (towards)mgm.o)' > the 2 ST's lights got blinking for a while (green & orange) then stay green > again : not connected :o/ > > Please any help welcome :o) > kozaki > > PS Happy New Year with the tux mascotte ! > > R�sum� : > 1. Installation drivers (speedtouch-1_0) et config r�alis�. > Mais �chec (pas de connexion) lors de la commande 'modem_run...' puis 'pppd > call adsl' > > 2. En quitant LinuxConf je lis (�cran "Status of the system) : > "the state of the syst isn't in sync with the current/updated config ... Here > is the command to execute: > Changing permission of file /usr/sbin/pppd from 105755 to 104755 > Service usbd isn't running > Executing: /etc/rc5.d/S02usbd start > The following command told me sthg has to be done > /etc/rc5.d/S14nflock probe > Executing: /etc/rc5.d/S14nflock restart " > > Bon, je "do it". > Et retape la s�quence de commandes de connexion du SpeedTouch (suivant les > commandes du HowTo de Benoit : > # /usr/local/bin/modem_run -m -f (chemin vers)mgm.o). > L�, les 2 diodes clignotent un bon coup, vert, orange (cas non document� > jusqu'ici), et puis restent vert fixe. Dc, not connected :o/ > > Tout conseil particuli�rement bienvenu :o) > > kozaki > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
