If you ever get it going, please let me know how. I've given up. Peter
----- Original Message ----- From: "Adrian J Lester" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, November 02, 2003 7:10 PM Subject: [speedtouch] Connection Issues > > Sorry for the vague subject line but I don't know what the root of the problem > here is. I have an Alcatel Speedtouch 330 modem, a Pipex ADSL connection in > the UK and speedbundle compiled and installed for pppoatm. > > I can't find anywhere in the documentation what commands one has to run in > what order to get things going, however I have been guessing at: > # modem_run -v 2 -m -f firmware.bin > # modprobe speedtch > # pppd call speedtch > in some order. > > Issue 1 (the firmware): > *************************** > If without speedtch.o inserted I run: > # modem_run -v 2 -m -f firmware.bin > I get promising stuff in syslog, see extract A below. However a > # modprobe speedtch > # cat /proc/net/atm/speedtch\:0 > gives: > Speed Touch 330 (usb-00:10.0-1) > MAC: 00:90:d0:b3:26:44 > AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop ) > Line state unknown, no firmware > so implying that the firmware has not been loaded after all. > > > If, then, I reboot the machine to make sure everything is cleaned out and try > loading the module first: > # modprobe speedtch > # modem_run -v 2 -m -f firmware.bin > I get an error telling me that the device is already in use by another > program, after the same initial stuff in syslog, and there's no nice "line is > up" line at the end. > > Issue 2 (persisting anyway): > ********************************** > If I ignore the ambiguity about the firmware (after the first method) and > carry on then pppd prints a lot of random stuff to the console and writes to > syslog: > Nov 3 13:04:17 Haar pppd[11377]: Plugin pppoatm.so loaded. > Nov 3 13:04:17 Haar pppd[11377]: PPPoATM plugin_init > Nov 3 13:04:17 Haar pppd[11377]: pppd 2.4.2b3 started by root, uid 0 > Nov 3 13:04:17 Haar pppd[11377]: Using interface ppp0 > Nov 3 13:04:17 Haar pppd[11377]: Connect: ppp0 <--> /dev/pts/0 > Nov 3 13:04:47 Haar pppd[11377]: LCP: timeout sending Config-Requests > Nov 3 13:04:47 Haar pppd[11377]: Connection terminated. > > Summary: > ************ > I am sure that I am being clueless and missing the point, running the wrong > things etc. but I have RTFM several times and can not find any basic usage > information. > If anyone could advise me I would be most grateful. > > ---------------------------------------- > Extract A > ---------------------------------------- > Nov 3 15:15:51 Haar modem_run[463]: 00 01 74 07 00 e1 74 07 00 5d 75 07 00 77 > ac 07 ..t...t..]u..w.. > Nov 3 15:15:51 Haar modem_run[463]: 00 81 9f 07 00 9d 9e 07 00 d9 9f 07 00 19 > ab ............... > Nov 3 15:15:52 Haar modem_run[463]: Modem reference : 35717710...... > Nov 3 15:15:52 Haar modem_run[463]: modem_start_synchro : > Nov 3 15:15:52 Haar modem_run[463]: 00 00 > .. > Nov 3 15:16:14 Haar modem_run[464]: Sending a signal to notify the adsl up > state > Nov 3 15:16:14 Haar modem_run[463]: ADSL synchronization has been obtained > Nov 3 15:16:14 Haar modem_run[463]: Modem State > Nov 3 15:16:14 Haar modem_run[463]: c0 12 0007 : > Nov 3 15:16:14 Haar modem_run[463]: 20 > Nov 3 15:16:14 Haar modem_run[463]: c0 12 000b : > Nov 3 15:16:14 Haar modem_run[463]: 00 00 40 02 00 00 20 01 > [EMAIL PROTECTED] . > Nov 3 15:16:14 Haar modem_run[463]: c0 12 000d : > Nov 3 15:16:14 Haar modem_run[463]: 06 00 00 ea > .... > Nov 3 15:16:14 Haar modem_run[463]: c0 01 000e : > Nov 3 15:16:14 Haar modem_run[463]: 00 > . > Nov 3 15:16:14 Haar modem_run[463]: c0 01 000f : > Nov 3 15:16:14 Haar modem_run[463]: 00 > . > Nov 3 15:16:14 Haar modem_run[463]: ADSL line is up (576 kbit/s down | 288 > kbit/s up) > -------------------------------------- > -------------------------------------- > > > Many thanks, > > Adrian Lester. > > > *************************** > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
