So. One option is to do a fresh install of RH Enterprise 3 then install the Speedbundle download. Is that correct? I note there are some problems with Speedbundle and RH9, is this something I should worry about? Also the included documentation for speedbundle (ie README) looks a bit skimpy to me, is there a dummies version anywhere?
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Duncan Sands > Sent: Monday, 17 November 2003 9:46 PM > To: [EMAIL PROTECTED]; Bill Bennett > Subject: [speedtouch] Re: Getting close Was Not your normal Speedtouch > Woes! > > > There are two drivers for the speedtouch modem: the "kernel mode driver" > which uses a kernel module and a special pppd, and Benoit's "user mode > driver" > which does not need the speedtch kernel module and uses an ordinary pppd. > The kernel mode driver's module is available in the latest 2.4 kernels. > This > makes your life easier if you are using the kernel mode driver (see > http://linux-usb.sf.net/SpeedTouch), but it doesn't help you if you are > using > the user mode driver as you are. In fact it makes things worse because > the > two drivers can fight over who gets to drive the modem. So not only do > you > still need to do all the usual steps to get the user mode driver working, > you may also need to delete (or unload) the speedtch module (it lives > in a directory under /lib/modules and is called speedtch.o). > > All the best, > > Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
