Duncan Sands napisał(a):
>>My new SpeedTouch 330 (silver, revision 4.00) modem gets disconnected
>>very often when it's
>>under heavy loads, eg. when I'm using DC or similar apps.
>>
>>
>What is DC?
>
>
Direct Connect.
>>May 16 07:25:43 adeon modem_run[28730]: Device disconnected, shutting down
>>May 16 07:25:43 adeon kernel: usb.c: USB disconnect on device 00:07.2-1
>>address 13
>>
>>
>
>It looks like the problem is that the device disconnected itself (the
>other messages are a consequence of this). Try different firmware.
>
The firmware I use is in the ZZZL_3.012 file from
SpeedTouch330_firmware_3012.zip .
Where can I get a different firmware?
> Try
>plugging it into a different usb port (one belonging to a different host
>controller if possible - by the way, what is the output of lspci?).
>
The output of 'lspci -v' was in my first e-mail, I'm showing it once again:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04)
Flags: bus master, medium devsel, latency 16
Memory at e0000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
[Apollo VP] (rev 47)
Subsystem: VIA Technologies, Inc. MVP3 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at e000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 02) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at e400 [size=32]
00:07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
Flags: medium devsel
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: D-Link System Inc DRN-32TX
Flags: bus master, medium devsel, latency 32, IRQ 12
I/O ports at e800 [size=256]
Memory at e2800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:0a.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Flags: medium devsel, IRQ 10
Memory at e2000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e1000000 [disabled] [size=64K]
> Use
>shorter cables and move the modem away from sources of electromagnetic
>interference. Does it work OK under windows?
>
>
I can't test it under windows at that host, but I tried to move it away
from other devices and it didn't help.
The machine has only 2 usb ports belonging to one controller so I can't
use another one.
Thanks for reply
Adam
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
