> > From: Duncan Sands <[EMAIL PROTECTED]> > Date: 2006/01/24 Tue AM 08:51:43 GMT > To: [email protected] > Subject: [speedtouch] Re: Connection Problem > > > Hi Richard, > > > I think you misunderstood. They are the messages that appeared when the > > connection was working. > > I did misunderstand. If I understand right now, the connection used to work > but doesn't anymore. What changed? > > > The problem lies in the fact that they are not appearing. The connection > > seems to be halting before the CHAP authentication section. > > > > Is there a way to get pppd to be more verbose in its output so I could try > > and work out where it is failing? > > If you usually do (eg) > pppd call speedtch > try doing > pppd call speedtch debug > > Ciao, > > Duncan. I appear to have fixed it now. I'm not sure how though so I cant say. I removed everything from the setup by going through the howto getting rid of everything. I then set it up again following the newer version of the howto. Following this I had to add the LCP_INTERVAL and LCP_FAILURE options to the ifcfg-ppp0 file. The only problem now is that it takes a long time to do the bringing up interface: ppp0 section of the boot.
Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
