Hi Folks,
I am having a problem getting a second Speedtouch 330 set up on my FC5
router/firewall. Up to press I have been using a pair of ADSL routers on
two ethernet cards, which has been working ok, but would like to
simplify the BoM and get more control over the WAN endpoints.
Getting one Speedtouch 330 up and running was no issue, but the second
one gets caught up with the first and in fact bings both lines down.
I suspect the issue is that both ISPs use VPI=0, VCI=38 and as this is
now presented in the same kernel, they are now clashing where they
wouldn't in two separate boxes. As I doubt that I can get either ISP to
change their settings, I suspect that this is game over for this
approach ... but would like confirmation from someone who knows more
about this stuff than I do.
In case it is important, I am using the kernel drivers and PPPoA on
Eclipse and PlusNET, with 8 IP addresses from each.
Hope someone can help
Andy M
--
____________________________________________________________
Andrew Meredith BEng CEng CITP MBCS MIEE
The Anvil Organisation Ltd
Director
http://www.anvil.org/ -- sip:[EMAIL PROTECTED]
[EMAIL PROTECTED] -------- +44 (0) 1249 460560
Need a Systems Administrator, just not a whole one?
Try our "As you need it" support and training services
____________________________________________________________
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
