On Wed, Aug 23, 2006 at 06:02:54PM +0200, Gilles Espinasse wrote: > > Selon Andrew Meredith <[EMAIL PROTECTED]>: > > > > > Gilles Espinasse wrote: > > > I doubt this could be related to atm side. > > > > I don't know enough about ATM. > > > > > There was one distrib made at one time with the support of this type of > > > configuration en England. > > > > Excellent .. I don't suppose you know of any references I can use to > > pick this up. My searches so far have not brought this out. > > > http://www.freestuffjunction.co.uk/bondedcd.shtml > But I suppose it is only for bonded links. > > > > It could be some usb related issue (bandwith or current used by the two > > > modems) > > > At which speed are link you use? > > > > The ADSLs are both MaxDSL, so float around up to 8MB. The USBs are both > > USB 2. > > > > > Are both modems on the same controller? > > > > Tried various .. just in case. > > > > > Wich pppd version do you use? > > > > ppp-2.4.3-6.2.1 > > > > > There was a change on ppp-2.4.3 to better support multilink (terminate > > > only > > when > > > no channel is connected). > > > > I am not trying to do multilink as such. The two DSLs are from different > > ISPs (deliberately .. redundancy) so there's no way I could bond them. > > > > So the problem should be narrowed in the ppp related scripts or in your usb > hardware. > What is your usb controller? Many not so young hardwares have bugs not > workaround by linux.
Could you also give the sequence of commands you execute and the error messages you get when the system fails? > > lspci -n | grep 0503 > > > Gilles > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se désinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
