Selon Andrew Meredith <[EMAIL PROTECTED]>: > > Gilles Espinasse wrote: > > I doubt this could be related to atm side. > > I don't know enough about ATM. > > > There was one distrib made at one time with the support of this type of > > configuration en England. > > Excellent .. I don't suppose you know of any references I can use to > pick this up. My searches so far have not brought this out. > http://www.freestuffjunction.co.uk/bondedcd.shtml But I suppose it is only for bonded links.
> > It could be some usb related issue (bandwith or current used by the two > > modems) > > At which speed are link you use? > > The ADSLs are both MaxDSL, so float around up to 8MB. The USBs are both > USB 2. > > > Are both modems on the same controller? > > Tried various .. just in case. > > > Wich pppd version do you use? > > ppp-2.4.3-6.2.1 > > > There was a change on ppp-2.4.3 to better support multilink (terminate only > when > > no channel is connected). > > I am not trying to do multilink as such. The two DSLs are from different > ISPs (deliberately .. redundancy) so there's no way I could bond them. > So the problem should be narrowed in the ppp related scripts or in your usb hardware. What is your usb controller? Many not so young hardwares have bugs not workaround by linux. lspci -n | grep 0503 Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
