----- Original Message -----
From: Jack <[EMAIL PROTECTED]>
> I'm also puzzled because I expected there to be a hunk of rubber w/ this
> stuff...something that fits inside the trunnion housing and around the
> trunnion bolt. The manual seems to say that this area is just filled w/
> grease. Is that right?
Do you have the steel tube which the bolt runs through? The nylon top-hat pices go
into the bronze trunnion from either side, each one trapping the inner steel washer,
then the tube goes through from side to side. When fitted to the car, the rubber ring
goes around the exposed nylon washer, then the final steel washer goes over that when
the assembly is inserted between the wishbone arms. The bolt goes directly through the
steel tube,
Cheers,
Bill.
--
Rarebits4classics
.......just what you've been looking for
PO Box 1232
Calne
Wiltshire
SN11 8WA
United Kingdom
http://www.rarebits4classics.co.uk
/// [EMAIL PROTECTED] mailing list
/// Send admin requests to [EMAIL PROTECTED]
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
/// Send list postings to [EMAIL PROTECTED]
/// Edit your replies! If they include this trailer, they will NOT be sent.
