Jack, Check out the drawings on my web page: http://pages.prodigy.net/mikeross/WtrShld.html They are of the rear wishbone, but the bushings and sheet metal water shields and shims (look like large fender washers) are the same.
Cheers, Mike http://pages.prodigy.net/mikeross/ updated 10/05/02 '63 Spritfire '66 Spitfire '69 GT6 convertible project '70 GT6+ (maroon) '70 GT6+ (green) ----- Original Message ----- From: "Jack" <[EMAIL PROTECTED]> To: "spitfire maillist" <[EMAIL PROTECTED]> Sent: Thursday, October 24, 2002 10:13 PM Subject: trunnion bushing > Hoping to pick someone's brain who has replaced the trunnion bushings. I'm > about to tackle that. I've got the parts and have sort of "dry fit" them on > the kitchen table. I am concerned about exactly what to do w/ the rubber > seals. The Haynes manual just says "fit them." Are they to be fit around the > flange of the nylon bushings or what? > I'm also puzzled because I expected there to be a hunk of rubber w/ this > stuff...something that fits inside the trunnion housing and around the > trunnion bolt. The manual seems to say that this area is just filled w/ > grease. Is that right? > > JAK > 76 1500. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
