In my experience, those flimsy little washers are often rotted beyond recognition...
Smart idea, using the tape. You could use a turn of scotch tape around the assembly just before shoving it into the A-arm, and simply let fragments of it remain afterwards. Doug At 08:05 PM 10/24/02 -0700, Dan Canaan wrote: >Yeah, two metal washers per side. The trap the square sided O ring between them. My >kit didn't have any assembly instructions and the originals had rotted away long ago >so it took me a while to figure out the assembly method. You can use a light >assembly grease such as white lithium to help keep things together, but unless you >are ready to put it together into the control arm at that point, I wouldn't do it >until you are ready. If you really insist on doing it, tape the finished assembly >together so you don't get dirt into the joints past the O ring. /// [EMAIL PROTECTED] mailing list /// Send admin requests to [EMAIL PROTECTED] /// or try http://www.team.net/cgi-bin/majorcool /// Archives at http://www.team.net/archive /// Send list postings to [EMAIL PROTECTED] /// Edit your replies! If they include this trailer, they will NOT be sent.
