-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Vaughan Sent: Thursday, July 21, 2005 8:46 PM To: [email protected] Subject: Neet Brit
I think Canley is way out there for Spit parts, but I found a spacer block to lower the rear 3/4 inch. My local machine shop wanted $60.00, more if they screwed up the first one. I bought one from Canley for $44.72. I had it five days later. The local machine shop redrilled my rear vertical links, to lower the rear spring 1" and it looked like a negative camber situation was possible. Now I have two alternative positions for lowering the rear spring, which is new. Wolfe racing has an adjustable rear vertical link. They are a British Co. What is wrong with the US importers? What is wrong with US production for that matter? No one in the US offers a spacer block. The general consensus is have a spring shop arch or dearch the rear spring. I have not found a spring company that would dearch a spring for less than $80.00, in Oklahoma. Why screw with a new spring, in a press, when other options are available that allow you to experiment and return to original specs. Just bitchin. Larry ################ Larry, There is a guy in Phoenix that can answer that question. He has a Spacer that he told me he wants to take off and have the spring dearched. Joe *** http://www.team.net/the-local *** Your messages not reaching the list? Check out http://www.team.net/posting.html *** unsubscribe/change address requests to [EMAIL PROTECTED] or try *** http://www.team.net/cgi-bin/majorcool *** http://www.team.net/mailman/listinfo *** Archives at http://www.team.net/archive *** Edit your replies!
