Hi Mike,
About 3-4 years ago I built up a 1500. Used the flat top pistons and
'shaved' the head to achieve a 9.5:1 compression ratio. And the engine runs
fine on USA 91 octane gasoline.
The pistons alone won't do much, it's the cylinder head work that did the
trick. Take the head to a competent engine rebuilder and talk it over. Tell
him what compression you are looking for and he should be able to get close.
Ken C
Here's my next crossroad that I would like the advice of the list members.
I'm thinking of changing the pistons from the dished out type that have a
7.5 to 1 compression ratio to the flat type that have a 9.0 to 1 ratio. Do
you think this is a good idea?
Mike
_________________________________________________________________
Dave vs. Carl: The Insignificant Championship Series. Who will win?
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://davevscarl.spaces.live.com/?icid=T001MSN38C07001
Your messages not reaching the list?
Check out http://www.team.net/posting.html
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
=== Help keep Team.Net on the air
=== http://www.team.net/donate.html
=== unsubscribe/change address requests to [EMAIL PROTECTED] or try
=== http://www.team.net/cgi-bin/majorcool
=== Other lists available at
=== http://www.team.net/mailman/listinfo
=== Archives at http://www.team.net/archive
=== http://www.team.net/the-local
=== Edit your replies!
