I need some help! The Spitbits online catalogue shows a clutch pin and a sleeve. It has been a long time since I looked at these parts in person and I don't recall anything resembling a sleeve. Also I don't recall exactly how the pin is held in place, whether it is by friction to the fork pin or friction to the bell housing. I'm hoping I can install a new pin without cracking the bell housing from the block. But if a sleeve is supposed to reside within the holes in the pin, I'm not sure there is one now, which means I may have to pull the thing apart after all. What I see now (by mirror) is a hole in the bell housing and holes just about the same diameter in the clutch arm. Am I missing something???
Tanks! -- Jim Muller [EMAIL PROTECTED] '80 Spitfire, '70 GT6+ -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.17/850 - Release Date: 6/15/2007 11:31 AM Your messages not reaching the list? Check out http://www.team.net/posting.html === This list supported in part by The Vintage Triumph Register === http://www.vtr.org === Help keep Team.Net on the air === http://www.team.net/donate.html === unsubscribe/change address requests to [EMAIL PROTECTED] or try === http://www.team.net/cgi-bin/majorcool === Other lists available at === http://www.team.net/mailman/listinfo === Archives at http://www.team.net/archive === http://www.team.net/the-local === Edit your replies!
